Urethane floor installation creates robust, chemical-resistant surfaces for demanding environments in residential, commercial, and industrial settings. USA Epoxy Floors mechanically prepares concrete by grinding to the specified surface profile, moisture tests, and applies multi-layer urethane systems. The finished floors deliver superior resistance to abrasion, chemicals, and thermal shock.
Every urethane floor installation with USA Epoxy Floors starts by assessing the condition of the existing concrete slab. George Tsinias, owner, evaluates substrate strength, checks for moisture with calibrated meters, and identifies any contaminants or repairs needed before coating. Surface preparation is performed by diamond grinding or shot blasting to achieve the CSP required for urethane systems, often CSP 3-5 for heavy-duty applications. Urethane resin is mixed and applied in multiple layers, typically starting with a primer for maximum adhesion. A high-build base coat follows, sometimes incorporating aggregate or sand for slip resistance and added mechanical strength. Once cured, one or more urethane topcoats are installed to provide chemical, abrasion, and UV resistance. For environments needing thermal shock and steam cleaning, a troweled urethane cement layer may be specified beneath the finish coats. Final inspection includes a thorough cure check, gloss or texture review, and a walk-through with the customer. The finished floor stands up to forklifts, heavy traffic, cleaning chemicals, and impact in industrial and commercial environments, or delivers lasting surface performance in garages, kitchens, and basements.
A urethane floor system’s durability depends on proper surface profile and substrate condition. USA Epoxy Floors uses diamond grinding or shot blasting to deliver the correct CSP for each installation, CSP 3 for most commercial spaces and 4-5 for industrial use. Accurate moisture testing ensures compatibility with moisture-sensitive urethanes. This preparation method prevents future delamination, blistering, and coating failure.
Urethane systems installed by USA Epoxy Floors provide protection that goes beyond standard epoxy. These floors resist aggressive chemicals, harsh cleaning agents, frequent washing, and sudden temperature changes. Urethane cement systems withstand steam cleaning and wide temperature swings, making them fit for commercial kitchens, food and beverage processing, pharmaceutical plants, and manufacturing spaces.
George Tsinias, owner of USA Epoxy Floors, performs a detailed inspection, onsite quoting, and remains present for the entire installation process. His knowledge of urethane system chemistry and required finishing techniques ensures that every floor meets the demands of the facility. This reduces project risk and delivers the correct solution for every site, whether residential, commercial, or industrial.
Fill in your information below
USA Epoxy Floors provides urethane floor installation for residential, commercial, and industrial properties. With over 25 years in the field, George Tsinias, owner, personally assesses each slab, specifies the correct urethane system, and oversees every step, preparation, mixing, application, and finishing. Urethane floors installed by the company stand out for their chemical resistance, thermal shock handling, and mechanical durability. USA Epoxy Floors is locally owned, family-operated, and veteran-owned, providing floors that fit the demands of garages, kitchens, warehouses, and production settings.
More About Us
Yes. USA Epoxy Floors handles Urethane Floor Installation throughout Dutchess and the surrounding Dutchess County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
Mechanical profiling, diamond grinding or shot blasting, so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Dutchess, and is on site during the work.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Floor refinishing by USA Epoxy Floors restores worn, damaged, or outdated concrete and resinous surfaces. The process starts with mechanical removal of existing coatings and contaminants, including diamond grinding for a new surface profile. The result is a leveled, repaired base ready for a fresh installation or reseal, delivering renewed performance and appearance.
View Service
Floor finishing by USA Epoxy Floors provides a protective and decorative surface treatment over concrete or resinous floors for homes, businesses, and industrial sites. This service includes surface cleaning, defect repair, and the application of a sealer or protective topcoat. The finished result is a floor with enhanced durability, tailored sheen, and a clean, uniform appearance.
View Service
USA Epoxy Floors provides concrete coating installation, covering residential, commercial, and industrial floors. Floors are cleaned, mechanically profiled, and moisture is tested before any coating system is applied. The finished floor gains chemical resistance, abrasion durability, and a renewed appearance.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
