Floor finishing by USA Epoxy Floors provides a protective and decorative surface treatment over concrete or resinous floors for homes, businesses, and industrial sites. This service includes surface cleaning, defect repair, and the application of a sealer or protective topcoat. The finished result is a floor with enhanced durability, tailored sheen, and a clean, uniform appearance.
Every floor finishing project starts with an on-site walk and evaluation by George Tsinias, owner of USA Epoxy Floors. The process involves careful assessment for surface contamination, moisture, and any previous coatings or repair work that could affect adhesion or appearance. Surface preparation is targeted: dust removal, stain cleaning, and defect patching are addressed as needed to ensure a smooth underlying substrate. Once the floor is prepped, the company selects the appropriate finishing system based on how the surface will be used, options include clear resinous topcoats, specialty sealers, or custom treatments for decorative finishes. Tools, application rates, and required dry times are matched to the product and floor conditions. For resinous floors, this may involve a final topcoat with slip resistance or UV protection; on raw concrete, a high-performance sealer or densifier could be used for dust control and stain defense. The finished floor receives a full walkthrough and inspection with the property owner to verify coverage, sheen, and consistency. Customers get an easy-to-clean floor with improved wear resistance, color enhancement, and a specific finish chosen to fit their environment, whether matte, satin, or gloss.
USA Epoxy Floors begins every floor finishing service with a thorough cleaning, dust removal, and patching of visible defects in the substrate. George Tsinias inspects for stains, cracks, and previous coating failures, addressing these before any product is applied. This approach ensures the finishing layer bonds securely and looks uniform, helping to prevent premature wear or peeling.
The finishing method is carefully selected for each property based on traffic, moisture exposure, and required performance characteristics. High-wear commercial spaces receive abrasion-resistant and slip-rated topcoats, while residential interiors may use decorative sealers for color enhancement. This matching process maximizes durability and appearance specific to how the floor is actually used.
Floor finishing from USA Epoxy Floors provides options in finish appearance, including satin, matte, and high-gloss. George recommends the best sheen for the environment and the owner’s preference, factoring in maintenance requirements and lighting. The result is a floor with the ideal balance of protection, reflectivity, and style for its setting.
Fill in your information below
USA Epoxy Floors provides floor finishing services that protect and enhance concrete, epoxy, and resinous floors across residential, commercial, and industrial properties. Every project is directly handled by George Tsinias, owner of USA Epoxy Floors, who uses 25+ years of experience to deliver precise surface preparation, customized product selection, and a finish that matches the environment’s needs. The company’s family-operated and veteran-owned history combines meticulous process with strong accountability at every step, from substrate cleaning through to the final walkthrough and signoff.
More About Us
Yes. Floor Finishing is part of the regular service range across Dutchess and Dutchess County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in Dutchess.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Epoxy floor resurfacing involves preparing worn or damaged epoxy and applying a new resinous system over it. The process includes mechanical abrasion, removal of loose material, and bonding a new coating to the cleaned surface. The result is a renewed, seamless floor that restores appearance and performance without full removal.
View Service
Floor coating involves installing a protective and decorative resin layer over concrete or prepared substrates in residential, commercial, and industrial spaces. The process includes surface assessment, mechanical preparation to achieve the required profile, and the application of epoxy, polyaspartic, or urethane coatings. The completed floor provides a durable, easily cleaned surface with a uniform appearance and resistance to wear.
View Service
Solid color epoxy floor installation delivers a seamless, monolithic resin floor system colored with uniform pigments. Installation includes assessment, moisture testing, diamond grinding, priming, and multiple coats of pigmented epoxy. The outcome is a durable, consistent, chemical-resistant surface for commercial, industrial, or residential use.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
