Solid color epoxy floor installation delivers a seamless, monolithic resin floor system colored with uniform pigments. Installation includes assessment, moisture testing, diamond grinding, priming, and multiple coats of pigmented epoxy. The outcome is a durable, consistent, chemical-resistant surface for commercial, industrial, or residential use.
Evaluation starts with a site visit where George Tsinias, owner of USA Epoxy Floors, inspects the concrete for existing coatings, cracks, moisture issues, or prior repairs. Moisture testing is performed to check for vapor transmission and prevent coating failure. Diamond grinding creates the proper concrete surface profile (CSP) so the new epoxy can bond. Primer application locks down the prepared concrete and ensures bond integrity. Pigmented epoxy base coats build up the color and create an even film. Each coat is allowed to cure within the manufacturer’s recoat window. For commercial and industrial projects, additional coats or performance topcoats are chosen for extra abrasion or chemical resistance. The final result is a uniform mono-color floor with no visible seams or color breaks. Completed floors are inspected with the client and touch-ups are performed as needed before job closeout. The new surface is ready for foot, vehicle, or equipment traffic once the full cure timeline is reached.
Solid color epoxy installations depend on the correct surface profile for long-term performance. USA Epoxy Floors uses diamond grinding to produce the CSP-3 profile ideal for most solid-color epoxy systems, ensuring mechanical adhesion between substrate and resin. This method prevents delamination and supports heavy use in commercial, warehouse, and garage environments.
Prior to installation, the substrate is tested for moisture using dedicated meters or calcium chloride test kits. George verifies that no vapor is present beyond the threshold for epoxy coatings. Any incompatible existing coatings are mechanically removed. These steps eliminate major causes of coating failure, such as blistering or bond loss.
Completed solid color epoxy floors present a continuous surface with no tile joints or grout lines. The resin-rich coating is chemical-resistant and can withstand solvents, oils, and cleaning agents common in garages, warehouses, and food-prep spaces. The seamless finish eliminates dust collection points and is easily maintained over time.
Fill in your information below
USA Epoxy Floors provides solid color epoxy floor installation for residential, commercial, and industrial sites across the region. George Tsinias, owner, brings 25+ years of experience in epoxy flooring and concrete preparation to each project. Every installation includes on-site assessment, written estimate, and direct oversight from evaluation through to final inspection. As a locally owned and veteran-operated company, USA Epoxy Floors is built on technical knowledge, proven install methods, and hands-on accountability. Solid color epoxy creates a professional, seamless look and delivers dependable performance for any high-use environment.
More About Us
Yes. USA Epoxy Floors handles Solid Color Epoxy Floor Installation throughout Dutchess and the surrounding Dutchess County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
Mechanical profiling, diamond grinding or shot blasting, so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Dutchess, and is on site during the work.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Quartz epoxy floor installation creates a durable, slip-resistant surface by embedding colored quartz aggregate into multiple layers of resin. The installation process includes mechanical surface preparation, application of a base coat, broadcast of quartz media, a grout coat, and a chemical-resistant topcoat. Property owners receive a high-performance resinous flooring system that stands up to heavy use and harsh conditions.
View Service
Epoxy coating is a resin-based system applied over concrete and other solid substrates to form a seamless, protective layer. The process includes diamond grinding to achieve the correct profile and addressing substrate defects before coating. The result is a durable, smooth surface built to handle regular use in residential, commercial, and industrial settings.
View Service
Epoxy floor resurfacing involves preparing worn or damaged epoxy and applying a new resinous system over it. The process includes mechanical abrasion, removal of loose material, and bonding a new coating to the cleaned surface. The result is a renewed, seamless floor that restores appearance and performance without full removal.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
