Epoxy coating is a resin-based system applied over concrete and other solid substrates to form a seamless, protective layer. The process includes diamond grinding to achieve the correct profile and addressing substrate defects before coating. The result is a durable, smooth surface built to handle regular use in residential, commercial, and industrial settings.
Every epoxy coating project by USA Epoxy Floors begins with a full evaluation of the substrate, moisture testing, and an inspection for cracks, contaminants, or incompatible previous coatings. Diamond grinding or shot blasting is chosen to reach the correct CSP rating needed for strong adhesion, and any repairs or leveling required are handled before work continues. The epoxy coating itself is mixed and installed according to the specified system, whether high-build, decorative, or standard, using industrial mixers, gauge rakes, rollers, and spiked shoes. Multi-layer systems may include a primer, base coat, broadcast of flake or quartz, and a chemical-resistant topcoat. Recoat windows are observed for each layer. Final inspection covers bond, coverage evenness, and finish quality. USA Epoxy Floors delivers a continuous, protective, and highly functional surface that stands up to the impact, traffic, and chemical exposure common in industrial, commercial, and residential environments.
Epoxy coating longevity depends on getting the concrete’s surface profile and moisture conditions right. George Tsinias, owner of USA Epoxy Floors, performs all substrate assessment himself. Surface is mechanically profiled to the correct CSP using diamond grinders or shot blasters, and moisture readings are taken before primer goes down. This reduces the risk of later bond failure or delamination.
The epoxy coating process includes joint and crack repair, patching of surface defects, and removal of old or failing coatings before any resin touches the floor. This prevents hidden weak points from shortening the coating’s lifespan. USA Epoxy Floors covers all prep, repair, and coating steps so the new surface performs from day one.
USA Epoxy Floors installs systems built for their actual environment, whether that means chemical-resistant shop coatings, slip-resistant garage finishes, or decorative resin for showrooms. The system, multi-coat, thin film, flake, or metallic, is specified to match use, traffic, and maintenance requirements. That approach delivers coatings that fit the property’s needs.
Fill in your information below
USA Epoxy Floors provides epoxy coating services for residential, commercial, and industrial properties across the region. George Tsinias, owner of USA Epoxy Floors, assesses every project from substrate through final inspection, leveraging 25+ years of experience. Services include substrate evaluation, surface profiling, joint and crack repair, and the installation of resin-based systems designed for long-term performance. The company’s locally owned, family-operated, and veteran-owned structure means clients deal with one expert from quote through walkthrough. Epoxy coatings from USA Epoxy Floors deliver protection, cleanability, and easy upkeep for everything from homes and garages to warehouses and retail spaces.
More About Us
Yes. Epoxy Coating is part of the regular service range across Dutchess and Dutchess County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in Dutchess.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors provides concrete floor coating for residential, commercial, and industrial spaces. Every project starts with a thorough slab assessment and mechanical preparation like diamond grinding or shot blasting. The finished result is a seamless, durable resinous surface matched to the environment and use.
View Service
Epoxy floor removal involves mechanically stripping existing epoxy or resinous coatings from concrete substrates. This service uses industrial grinders, shot blasters, and specialized scraping equipment to return the slab to bare, open concrete. Property owners receive a fully prepared surface ready for a new system, flooring installation, or further concrete work.
View Service
Epoxy floor design at USA Epoxy Floors is a process where the system, color, finish, and style are planned together with the customer to meet the visual and performance requirements of the space. George Tsinias assesses the substrate, environment, and design vision before building out the options. The result is a finished epoxy floor that looks intentional and delivers the specified performance for residential, commercial, or industrial environments.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
