Floor refinishing by USA Epoxy Floors restores worn, damaged, or outdated concrete and resinous surfaces. The process starts with mechanical removal of existing coatings and contaminants, including diamond grinding for a new surface profile. The result is a leveled, repaired base ready for a fresh installation or reseal, delivering renewed performance and appearance.
The floor refinishing process starts with an on-site evaluation by George Tsinias, owner of USA Epoxy Floors, to determine the condition of the slab, any existing coatings, and the type of wear or damage present. Moisture readings and adhesion testing are performed as needed to identify underlying issues affecting the final result. Preparation may involve mechanical removal of failed coatings, oil or contaminant extraction, repair of cracks and joints, and grinding to achieve the correct surface profile for the next system. Diamond grinders, shot blasters, and dust extraction equipment are used to ensure a stable, clean base. System selection, epoxy, polyaspartic, urethane, or a polished finish, is matched to the space’s conditions, use, and performance requirements. After preparation, the selected coating or finish system is installed in multi-layer sequences, often including primer, base coat, decorative elements if used, and durable topcoats. Finished work is inspected, restored seams are checked for performance, and the area is left ready for immediate use or handoff to another trade if part of a buildout.
USA Epoxy Floors mechanically removes all failed or outdated coatings before new finishing. Diamond grinding, shot blasting, and industrial dust collection restore an open concrete profile (CSP specification) required for the next system. This approach ensures proper adhesion for any new coating or finish, whether resinous or polished.
Every refinishing project begins with condition assessment: George detects hidden moisture, checks slab integrity, and tests for compatibility with new materials. Failed patches, contaminant absorption, and prior incorrect installations are diagnosed and rectified. This prevents recurring failures and ensures the outcome is built on stable substrate conditions.
George Tsinias, owner of USA Epoxy Floors, manages every step from first inspection through final walkthrough. Customers work directly with the person making the technical decisions and performing the work. The process is transparent, and every repair, removal, and new finish is executed for the best result, not just to cover the existing floor.
Fill in your information below
USA Epoxy Floors provides floor refinishing for residential, commercial, and industrial spaces, restoring the performance and appearance of concrete and resinous floors. With over 25 years in the trade, owner George Tsinias personally evaluates every floor, specifies the right preparation, and manages the hands-on work. Floor refinishing involves full removal of failed coatings, all necessary repairs, crack and joint restoration, and proper surface profiling before any new system is installed. The locally owned, family-operated, veteran-owned business brings deep experience to every project, delivering results that solve recurring floor problems and extend the useful life of the surface. USA Epoxy Floors gives property owners a renewed surface capable of supporting the next installation or standing as a finished floor.
More About Us
Yes. USA Epoxy Floors handles Floor Refinishing throughout Dutchess and the surrounding Dutchess County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
Mechanical profiling, diamond grinding or shot blasting, so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Dutchess, and is on site during the work.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Floor finishing by USA Epoxy Floors provides a protective and decorative surface treatment over concrete or resinous floors for homes, businesses, and industrial sites. This service includes surface cleaning, defect repair, and the application of a sealer or protective topcoat. The finished result is a floor with enhanced durability, tailored sheen, and a clean, uniform appearance.
View Service
Concrete resurfacing by USA Epoxy Floors updates worn or damaged concrete surfaces with a restored, functional finish. The process starts with mechanical surface preparation such as grinding and repairs to address cracks or deterioration. The result is a durable, level slab ready for use or further finishing, extending the service life of the existing concrete.
View Service
Concrete polishing transforms a plain slab into a reflective finished surface through a mechanical grinding and polishing sequence. The process uses progressively finer diamond abrasives and corrects surface defects and imperfections along the way. The result is a dense, dust-proof concrete floor with a polished sheen that resists wear and is easy to maintain.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
