Concrete resurfacing by USA Epoxy Floors updates worn or damaged concrete surfaces with a restored, functional finish. The process starts with mechanical surface preparation such as grinding and repairs to address cracks or deterioration. The result is a durable, level slab ready for use or further finishing, extending the service life of the existing concrete.
George Tsinias, owner of USA Epoxy Floors, begins with a full inspection of the existing concrete to check for damage, structural issues, and surface contamination. Moisture testing and adhesion checks are completed to determine what repairs or mitigation are needed before resurfacing starts. If required, cracks are routed and filled, and weak sections are patched using specialized repair materials matched to the slab’s needs. Next, the surface is diamond ground or shot blasted to the correct CSP for the resurfacing system being installed. The preparation method is chosen to expose clean concrete and ensure maximum bond with the new topping. A high-strength resurfacing compound or polymer-modified overlay is then installed, applied with industrial mixers and gauge rakes to achieve a uniform, level finish. After resurfacing, the area is allowed to cure according to material specifications. The finished slab is inspected for flatness, surface integrity, and bond quality. Customers receive a smooth, restored concrete slab suitable for coatings, polishing, staining, or renewed use as bare concrete.
USA Epoxy Floors assesses the profile and condition of every concrete surface before resurfacing. George selects the correct grind or shot blast technique and ensures contaminants, weak spots, and unstable coating remnants are fully removed. This diagnostic approach gives the resurfacing material the bond it needs for long-term durability.
Cracks, surface pitting, and spalling are all addressed before any overlay is applied. George uses professional-grade crack routing and repair compounds engineered to integrate with the slab and the new resurfacing material. This results in a uniform, defect-free base ready for finishing or use.
After resurfacing, the concrete is left smooth and even, with a fresh surface profile suitable for epoxy coatings, stains, or polishing. This process addresses underlying problems so the slab can receive a new finish or simply be used as renewed concrete, free from past wear and visible damage.
Fill in your information below
USA Epoxy Floors provides expert concrete resurfacing for residential, commercial, and industrial properties across the region. Owner George Tsinias brings over 25 years of hands-on floor restoration and surface preparation experience to every project. Diagnosing slab conditions, performing targeted repairs, and applying high-performance resurfacing materials, he ensures each floor is properly rebuilt and ready for years of service. This locally owned, family-operated, and veteran-owned company restores worn or damaged slabs to a fully usable state, delivering durable results for property owners and contractors needing to recover or reclaim their existing concrete.
More About Us
Yes. Concrete Resurfacing is part of the regular service range across Dutchess and Dutchess County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in Dutchess.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors provides Epoxy Floor Repair for peeling coatings, cracked resin, worn traffic paths, hot tire pickup, bubbling, and localized delamination in residential, commercial, and industrial floors. Repair begins with diagnosis, adhesion checks, moisture readings when needed, and mechanical preparation of the damaged area. The customer receives a repaired section matched to the existing system where the coating can be saved, or a clear recommendation when removal is the correct next step.
View Service
Concrete staining by USA Epoxy Floors creates permanent color by penetrating deep into the slab, not just coating the top. Acid-based or water-based stains are applied after surface is cleaned and prepped, ensuring proper absorption and color development. Finished floors display natural variation, mottled tones, and a unique, wear-resistant appearance.
View Service
Urethane floor installation creates robust, chemical-resistant surfaces for demanding environments in residential, commercial, and industrial settings. USA Epoxy Floors mechanically prepares concrete by grinding to the specified surface profile, moisture tests, and applies multi-layer urethane systems. The finished floors deliver superior resistance to abrasion, chemicals, and thermal shock.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
