Epoxy floor sealing at USA Epoxy Floors applies a compatible resin-based sealer to new or existing epoxy surfaces as a protective topcoat. The process requires surface cleaning, light mechanical abrasion, and applying a system-matched seal coat. This service increases chemical resistance, reduces wear, and improves cleanability for residential, commercial, and industrial floors.
All epoxy floor sealing work by USA Epoxy Floors starts with a detailed inspection of the existing coating or new surface. George Tsinias, owner of USA Epoxy Floors, evaluates for adhesion, contamination, and prior finish integrity before any work is performed. Surfaces are then degreased, cleaned, and mechanically abraded using diamond pads or screen discs to achieve a profile suitable for the seal coat required by the chosen system. The sealing process uses a compatible resin-based material, typically clear or pigmented epoxy, polyaspartic, or urethane, selected based on environment and existing floor chemistry. Application is performed under controlled temperature and humidity, with each coat mixed, spread, rolled, and de-aerated according to system guidelines. The method and number of coats vary depending on whether the project is residential, commercial, or industrial. Once the seal coat is cured, each installation undergoes a visual and physical inspection for gloss, uniformity, and adhesion. The customer receives an upgraded, more durable floor surface that is easier to clean and maintain and is better protected against impact, chemicals, and abrasion.
USA Epoxy Floors selects sealer materials compatible with the substrate and any existing coating system. George Tsinias reviews the installed floor for chemistry and performance requirements, matching epoxy, polyaspartic, or urethane to the environment. This ensures no bubbling, delamination, or soft-cure issues, which can occur when mismatched products are used.
Proper adhesion of a new sealer requires a mechanically abraded floor, not just a pressured cleaning. USA Epoxy Floors uses diamond pads or screening to open the existing finish so the new seal coat can bond chemically and mechanically. Skipping this step leads to peeling and premature failure. This preparation differs by sealer material and site conditions.
Applying a professional-grade sealer adds a tough layer that protects against chemical spills, water intrusion, and abrasion. A sealed epoxy floor is significantly easier to clean and disinfect, critical for commercial kitchens, bathrooms, or manufacturing. Gloss and slip-resistant options can be selected to match each environment and traffic level.
Fill in your information below
USA Epoxy Floors provides epoxy floor sealing for residential, commercial, and industrial flooring across every service market. George Tsinias, owner of USA Epoxy Floors, evaluates every surface personally, recommends the best sealing system, and handles preparation and application himself, from initial assessment to final inspection. The company addresses new and existing epoxy floors, addressing wear, gloss loss, and exposure to moisture or chemicals. Locally owned, family-operated, and veteran-owned, USA Epoxy Floors brings over 25 years of experience in resinous flooring systems and surface protection, with floor sealing supported by hands-on technical knowledge at every stage.
More About Us
Yes. Dutchess and communities across Dutchess County, New York. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Dutchess spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Dutchess, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Concrete polishing transforms a plain slab into a reflective finished surface through a mechanical grinding and polishing sequence. The process uses progressively finer diamond abrasives and corrects surface defects and imperfections along the way. The result is a dense, dust-proof concrete floor with a polished sheen that resists wear and is easy to maintain.
View Service
USA Epoxy Floors provides concrete coating installation, covering residential, commercial, and industrial floors. Floors are cleaned, mechanically profiled, and moisture is tested before any coating system is applied. The finished floor gains chemical resistance, abrasion durability, and a renewed appearance.
View Service
Epoxy coating is a resin-based system applied over concrete and other solid substrates to form a seamless, protective layer. The process includes diamond grinding to achieve the correct profile and addressing substrate defects before coating. The result is a durable, smooth surface built to handle regular use in residential, commercial, and industrial settings.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
