USA Epoxy Floors delivers concrete grinding in Kent to prepare, restore, or level slabs in homes, businesses, and industrial properties. Variable-speed diamond grinders are used to create a surface profile matched to coating, stain, or polishing requirements. The slab is left clean, dust-free, and ready for further work or handoff.
Each concrete grinding project in Kent is launched by George Tsinias, owner of USA Epoxy Floors, visibly testing slab hardness and noting any overlays, repairs, or vapor issues. The grinding plan details which diamond grit, sequence, and passes are right for Dutchess County properties, whether they’re older buildings or new construction. High-performance grinders and targeted edge tools move through the area in mapped, overlapping lines, dialing in the correct CSP for the finished system, thin-film, industrial build, or decorative polish. All border transitions and column bases in Kent are prepared with smaller tools, so nothing is missed. Dust-control extraction is constantly in use, keeping the workspace clean and compliant. The site is thoroughly cleaned and checked for uniform texture, patchwork, or dust. Any joints, defects, or cracks in Kent get addressed with the appropriate repair materials. USA Epoxy Floors delivers a ready-to-finish and fully documented slab, which can be handed off to another contractor or taken to the next step for coatings or stains.
Grinding in Kent is customized to hit the right Concrete Surface Profile for the intended finish, ranging from CSP 2 for thin sealers to CSP 5 for high-build resin. Grinder selection, pressure, and diamond grit all follow the requirements of the system and the unique conditions in Dutchess County.
George Tsinias reviews each Kent slab for contamination, hardness, and repairs before picking diamond bonds and machines. Failed coatings, old adhesives, or unprofiled surfaces are removed mechanically, leaving strong, clean concrete ready for any finish system on New York projects.
Every surface in Kent gets full attention, main floors, tight areas, and edges alike. Detail grinders bring all sections up to specification, while continuous dust extraction keeps job sites in Dutchess County cleaner and safer. The end result is a surface with no missed transitions or dust.
Fill in your information below
USA Epoxy Floors manages concrete grinding across Kent and Dutchess County, led on-site by George Tsinias, a 25-year flooring specialist experienced in prep, restoration, and finishing. The company fits every home, business, or industrial project with the correct tooling and CSP for its next phase, including coatings, polished concrete, and stain. As a locally owned and veteran-run operation, the company brings specification-level prep and full surface readiness to every slab in Kent, delivered with the hands-on discipline and owner oversight found in every project.
More About Us
Yes. Kent and communities across Dutchess County, New York. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Kent spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Kent, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors manages epoxy floor removal in Kent by extracting resin and epoxy coatings through industrial grinding and stripping, leaving the slab fully open and clean for a new surface or contractor follow-up.
View Service
USA Epoxy Floors levels concrete floors by grinding high spots and filling low areas using precision tools and leveling compounds. This service delivers a flat, finished slab ready for coatings, tile, carpet, or polished concrete in Kent.
View Service
Epoxy floor recoating in Kent brings new life to aged or damaged resin floors by inspecting compatibility, mechanically profiling surfaces, and installing a new matching resin layer. This process renews durability, adhesion, and visual impact in any Kent property.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
