Epoxy floor installation involves applying multiple layers of industrial resin coatings over properly prepared concrete slabs in residential, commercial, and industrial spaces. The process includes concrete assessment, moisture testing, surface profiling, primer, build coats, and protective topcoats. The completed floor resists wear, chemicals, and moisture, producing a seamless surface built for daily use.
Before installation, USA Epoxy Floors inspects the existing slab for cracks, contamination, repairs, or prior coatings that could affect adhesion. George Tsinias, owner of USA Epoxy Floors, conducts on-site moisture testing and determines whether diamond grinding, shot blasting, or other surface preparation is required to achieve the specified concrete surface profile (usually CSP 2–4, depending on the chosen system). Coating compatibility and slab condition are verified to prevent delamination or moisture-driven failure. The installation follows a multi-layer process: after surface prep, a primer is applied to maximize adhesion, followed by a base coat. Depending on the floor system, decorative media such as flake, metallic pigment, or quartz broadcast is added. Build coats are layered for thickness or added function, and the final topcoat (polyaspartic, urethane, or specialty resin) is applied to match the performance needs of the environment, such as abrasion resistance or chemical protection. After curing, the floor is inspected alongside the customer for uniformity, bond strength, and appearance. George completes a final walkthrough to confirm that all aspects of the installation meet performance and visual requirements. The customer receives a finished epoxy floor that stands up to real-world conditions across industrial, commercial, or residential settings.
The foundation of every epoxy floor is the condition of the concrete slab beneath it. USA Epoxy Floors begins each project with mechanical diamond grinding or shot blasting to create the ideal concrete surface profile for the selected system. This physical preparation allows resin to bond directly to the open pores of the slab, reducing risk of peeling, hot tire pickup, or moisture-related failure.
Professional epoxy floor installation is never a one-coat job. USA Epoxy Floors applies primer, base coat, and topcoat to every floor, with optional broadcast or accent layers for performance and design. Each layer serves a purpose: adhesion, thickness, impact resistance, texture, or chemical defense. This sequence creates a floor that holds up to traffic, equipment, chemicals, and cleaning.
George Tsinias, owner of USA Epoxy Floors, personally inspects every job before quoting and directs all phases of installation through final signoff. His assessment determines the right preparation method, repair needs, and compatible coating system based on 25+ years in concrete and epoxy work. The person reading the slab is the one installing the system.
Fill in your information below
USA Epoxy Floors provides epoxy floor installation for homes, businesses, and industrial properties. Every job begins with on-site assessment by George Tsinias, owner, who diagnoses slab condition, plans surface prep, and recommends the right resin system for the environment. With over 25 years of flooring expertise, the company delivers multi-layer epoxy systems using diamond grinding, moisture testing, and build coats engineered around real-world use. Locally owned, family-operated, and veteran-owned, USA Epoxy Floors is trusted for its thorough installation process, owner oversight, and proven results across residential garages, commercial spaces, and heavy-use industrial areas.
More About Us
Yes. Dutchess and communities across Dutchess County, New York. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Dutchess spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Dutchess, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Metallic epoxy floor installation creates custom, visually dynamic surfaces using pigmented epoxy and metallic powders. The process involves diamond grinding the concrete for a CSP-3 profile, applying a pigmented base coat, then adding, manipulating, and sealing metallic epoxy layers for depth. The result is a one-of-a-kind, high-gloss floor with unique pattern movement and durable protection.
View Service
USA Epoxy Floors provides concrete grinding for slab preparation, leveling, or surface restoration in residential, commercial, and industrial spaces. The process uses diamond grinders to open the surface to the correct profile required for new coatings or sealers. The result is a clean, profiled concrete slab ready for the next step in any flooring system.
View Service
Polyaspartic floor installation involves applying a resinous coating system designed for demanding environments where fast return to service and chemical resistance are required. The process includes diamond grinding or shot blasting to achieve the CSP profile the system needs, followed by a moisture test to confirm slab readiness before primer and polyaspartic coats are applied. Customers receive a finished floor that can be put back into use within hours, with uniform color, gloss, and durability in high-traffic and commercial spaces.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
