Concrete floor leveling from USA Epoxy Floors corrects uneven, sloped, or rough concrete slabs to create a flat, even surface. The process involves mechanical grinding, filling low spots with specialized leveling compounds, and verifying the final plane with precision tools. Customers receive a substrate ready for new flooring, coatings, or use as polished or stained concrete.
Every concrete floor leveling project starts with a comprehensive evaluation of the floor’s profile, high and low areas, and the overall slope. George Tsinias, owner of USA Epoxy Floors, assesses the slab using straightedges, laser levels, and moisture meters to determine the amount and type of corrective work needed. This step often reveals hidden issues, such as floor settlement or previous poor patching, that must be addressed. The actual floor leveling operation combines mechanical grinding to reduce high points and the installation of self-leveling or patching compounds to fill depressions. Industrial floor grinders equipped with diamond tooling achieve the targeted surface profile. Self-leveling materials or engineered patch compounds are hand or pump-applied to fill voids and feather low areas to grade, followed by re-grinding or troweling if needed for uniformity. In commercial and industrial environments, leveling is often performed before a resinous coating system or finished topping goes down. Final checks confirm the surface flatness and suitability for the intended flooring system. Any required expansion joints or control joints are re-established, and the finished result is thoroughly cleaned. The customer receives a flat, defect-free substrate ready for epoxy, polyurethane, tile, carpet, VCT, or as a finished polished or stained concrete floor. USA Epoxy Floors provides documentation of the process for future reference.
USA Epoxy Floors uses planetary-mounted diamond grinders and industrial tooling to mechanically remove high spots and surface irregularities before any leveling compounds are applied. This process not only flattens the slab but also creates a proper surface profile for primer and patch materials to achieve full mechanical bond, which prevents future shifting or delamination.
George selects the appropriate self-leveling or patching compounds based on substrate condition, finished floor requirements, and application thickness. By mixing and installing these materials according to manufacturer specifications, then feathering transitions to adjacent finishes, the leveled surface avoids cracking, shrinking, or unlevel seams. This is especially important for demanding finishes like resinous coatings or polished concrete.
George Tsinias, owner of USA Epoxy Floors, performs the site evaluation himself, using straightedges and laser leveling to identify the root causes of unevenness. His direct involvement means hidden issues like substrate flex, moisture buildup, or concealed prior patching get identified before work starts, so no costly surprises arise during resurfacing or installation.
Fill in your information below
USA Epoxy Floors provides concrete floor leveling for residential, commercial, and industrial properties, ensuring a flat and structurally sound base for new flooring or finishing systems. George Tsinias, owner of USA Epoxy Floors, brings more than 25 years of hands-on concrete and preparation experience to every job, evaluating and leveling uneven, sloped, or damaged slabs with the right combination of grinding and specialized compounds. The company is locally owned, family-operated, and veteran-owned, serving as the go-to specialist for contractors, builders, and property owners needing perfectly leveled substrates for epoxy coatings, polished finishes, or any finished floor system.
More About Us
Yes. USA Epoxy Floors handles Concrete Floor Leveling throughout Dutchess and the surrounding Dutchess County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
Mechanical profiling, diamond grinding or shot blasting, so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Dutchess, and is on site during the work.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Concrete repair addresses cracks, pits, surface defects, and joint issues in damaged or deteriorating concrete slabs. Repairs follow a technical evaluation to identify instability, contamination, and structural problems before patching. The finished repair restores a level, sound substrate ready for new flooring or continued use.
View Service
Concrete resurfacing by USA Epoxy Floors updates worn or damaged concrete surfaces with a restored, functional finish. The process starts with mechanical surface preparation such as grinding and repairs to address cracks or deterioration. The result is a durable, level slab ready for use or further finishing, extending the service life of the existing concrete.
View Service
Polyurea floor installation involves preparing concrete surfaces, applying a polyurea primer, then coating and finishing to create a durable, chemical-resistant floor. Surface must be profiled by diamond grinding or shot blasting for bond. The result is a fast-curing, seamless surface that handles heavy traffic and harsh conditions.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
