Epoxy coating by USA Epoxy Floors protects prepared concrete in Kent using a seamless, layered resin system. Surfaces are mechanically profiled, repaired, and coated for resilience against impact and traffic. Kent customers receive a functional finish for frequent use.
For epoxy coating projects in Kent, USA Epoxy Floors begins by conducting a thorough site evaluation, including moisture measurement and identification of previous coatings or contaminants. Once these are established, diamond grinding or shot blasting is performed to achieve the right CSP texture for the chosen system. Any cracks, joints, or uneven areas in Kent slabs are repaired before moving to the next phase. During installation in Kent, system components are mixed and applied: a primer coat if needed, followed by the resin base layer, with options for embedded flakes or quartz, finished with a protective topcoat. Equipment like professional-grade mixers, squeegees, and gauge rakes ensure an even finish. The recoat timing is managed carefully to prevent bonding issues between layers. Final site review in Kent checks for uniformity, bond soundness, and finished appearance. USA Epoxy Floors provides Kent with flooring that meets routine and demanding use in garages, warehouses, and occupied residences, defending against abrasion, traffic, and spills.
Each Kent floor receives moisture analysis and tailored mechanical CSP profiling, handled directly by George Tsinias. This targeted prep addresses Kent’s climate and site variables, allowing the epoxy system to adhere and cure as specified and preventing future failures like bubbling or delamination.
USA Epoxy Floors performs all crack filling, joint repair, and failed-coating removal in Kent before any epoxy is installed. Old finishes and surface issues are eliminated so the new resin system bonds only to stable concrete, greatly increasing coating service life for Kent spaces.
USA Epoxy Floors chooses the type of epoxy coating system based on real Kent conditions, such as forklift traffic, automotive use, wet service, or the need for a decorative sheen. Coatings are selected to function and last as dictated by the property and workflow in Kent.
Fill in your information below
USA Epoxy Floors delivers epoxy coating expertise for homes, industry, and businesses in Kent, managed entirely by George Tsinias from consultation to inspection. From assessing conditions and profiling concrete, to correcting flaws and building multi-coat epoxy systems, every stage is handled with deep practical experience. The company is locally rooted, family and veteran owned, with one owner guiding Kent clients through quoting and every on-site stage. The result: a tough, clean epoxy coating tailored to the actual performance demands of Kent environments.
More About Us
Yes. USA Epoxy Floors handles Epoxy Coating throughout Kent and the surrounding Litchfield County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
Mechanical profiling, diamond grinding or shot blasting, so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Kent, and is on site during the work.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors provides Kent concrete floor coating for residential, commercial, and industrial properties. Projects are built on correct surface prep such as diamond grinding or shot blasting. The finished system delivers a durable, seamless floor designed for Kent environments.
View Service
Epoxy floor removal by USA Epoxy Floors returns concrete slabs to bare, open substrate by fully stripping failed or unwanted resinous coatings with mechanical grinding and heavy-duty removal equipment in Kent.
View Service
Epoxy floor design in Kent from USA Epoxy Floors pairs resin systems, finish options, and construction methods with the real demands of each space. George Tsinias evaluates both site and style before any recommendation. The end result is a visually distinctive, technically robust epoxy floor for Kent buildings.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
