USA Epoxy Floors applies concrete coatings for West Mountain industrial, commercial, and home projects. Work includes profiling each slab and testing for moisture and contaminants before coatings are set. Finished floors stand up to abrasion, chemicals, and wear in every West Mountain use case.
Each West Mountain coating project begins with a careful look at slab condition, possible prior overlays, and vapor migration. George Tsinias, owner of USA Epoxy Floors, examines strength and any surface contamination before committing to a method. The next steps use industrial grinding or shot blasting to get a bondable surface. Joints and cracks in West Mountain are repaired, all dust is vacuumed, and a primer is rolled before the proper coating system is built. Options in West Mountain include epoxy, polyaspartic, and urethane, layered with solid color, flakes, or quartz for visual or slip-resistance upgrades as needed. After coating, every section is checked for coverage, cure, and finish. The new floor stands up to the rigors of West Mountain-area properties, with aesthetic and technical choices made to fit real life. Each system gains protection from moisture, abrasion, and regular use.
Floors in West Mountain are mechanically profiled using diamond grinding or shot blasting to promote a surface that bonds with the intended coating system. This attention to surface quality stops future delamination and keeps West Mountain coatings anchored long-term.
George tests West Mountain slabs for vapor emissions before any resin is applied. Abnormal readings are met with a moisture barrier or mitigation solution, shielding new coatings from bubbling, loss of adhesion, or hidden water pressure common to older concrete.
Each West Mountain coating installation receives a chemical and build sequence tailored to its use, warehouse, clinic, retail, or workshop. System selection covers epoxy, polyaspartic, and urethane, with design and slip-resistance features built to fit the specific setting.
Fill in your information below
USA Epoxy Floors performs concrete coating work for West Mountain industrial, commercial, and home properties. George Tsinias evaluates every slab and tailors prep, chemistry, and visual effects for each site. As a family and veteran-owned business, all work is handled in-house, with careful surface testing, repairs, and custom finishes. Choices range from quartz blends and flake systems to smooth solid-color coatings, each system selected for the demands properties in West Mountain face. Over 25 years of direct experience means every detail, from moisture checks to the last coat, is covered for lasting protection and a professional finished result throughout West Mountain.
More About Us
Yes. Concrete Coating is part of the regular service range across West Mountain and Fairfield County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in West Mountain.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors applies West Mountain concrete floor coatings in industrial, residential, and commercial settings. Every job begins with substrate testing and slab preparation, including grinding and defect repair. The completed system forms a tight, resinous surface engineered for West Mountain operational needs.
View Service
In West Mountain, USA Epoxy Floors restores level and flat condition to concrete floors by diagnosing, grinding peaks, and applying advanced leveling systems to fill and correct slab imperfections. The resulting finish is ready for coatings, polish, or any flooring installation in Fairfield County.
View Service
In West Mountain, USA Epoxy Floors resurfaces worn or failing epoxy floors by mechanically removing loose coating, grinding to open the profile, and installing a new resin system. This preserves what’s solid and replaces only what’s needed, making the floor clean and durable again.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
