USA Epoxy Floors restores worn slabs in Washington with concrete resurfacing. Preparation includes mechanical grinding and repairs. Finished areas are left level, solid, and ready for coatings or renewed use.
Surfaces in Washington are inspected by George Tsinias, owner of USA Epoxy Floors, for cracks, spalling, and bond issues before resurfacing. Testing for moisture and substrate condition guides repairs such as crack routing and patching with system-matched materials. Next, the slab is mechanically profiled with the correct CSP using diamond grinding or shot blasting based on the final use. The resurfacing overlay is installed at the designated thickness to achieve a flat, consistent surface over the prepared area. Once cured, the finished concrete in Washington is inspected for surface quality and integrity. Property owners receive a renewed slab that is level, defect-free, and ready for coatings, stains, or regular use.
Surfaces in Washington are assessed for contamination, deterioration, and previous repair attempts. George uses grinding or shot blasting to create the proper bond profile before resurfacing begins, which ensures overlay adhesion and a stable foundation.
Every resurfacing job in Washington includes routing and repair of cracks and spalls before new material is applied. Professional patching compounds restore slab stability so the finished overlay looks and performs consistently.
After resurfacing, slabs in Washington are smooth, level, and free of visible prior damage. This restored surface is suitable for any topcoat, decorative finish, or direct-use as upgraded concrete for commercial or residential spaces.
Fill in your information below
Across Washington and Dutchess County, USA Epoxy Floors delivers complete concrete resurfacing for homes, businesses, and industrial settings. George Tsinias oversees each project, applying 25 years of technical expertise to restore damaged or worn slabs and prepare them for any final finish. With local ownership, family operation, and a veteran background, USA Epoxy Floors is the regional source for durable, high-quality slab revitalization that allows property owners in Washington to extend the service life of their original concrete.
More About Us
Yes. Concrete Resurfacing is part of the regular service range across Washington and Dutchess County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in Washington.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors provides Epoxy Floor Repair in Washington for peeling coatings, cracked resin, worn traffic paths, hot tire pickup, bubbling, and localized delamination in residential, commercial, and industrial floors. Repair begins with diagnosis, adhesion checks, moisture readings when needed, and mechanical preparation of the damaged area. Dutchess County customers receive a repaired section matched to the existing system where the coating can be saved, or a clear recommendation when removal is the correct next step.
View Service
USA Epoxy Floors uses mechanical and chemical preparation in Washington to install concrete stains that bond below the surface. Acid and water-based stains combine with concrete to create detailed color variation rather than a solid color. Floors in Washington get durable, visually unique finishes that do not peel.
View Service
Urethane floor installation in Washington by USA Epoxy Floors starts with mechanical surface prep and moisture checks, followed by multi-layer urethane application. The result is a high-performance floor that withstands chemicals, impact, and thermal shock.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
