Epoxy coating by USA Epoxy Floors protects prepared concrete in Staples using a seamless, layered resin system. Surfaces are mechanically profiled, repaired, and coated for resilience against impact and traffic. Staples customers receive a functional finish for frequent use.
For epoxy coating projects in Staples, USA Epoxy Floors begins by conducting a thorough site evaluation, including moisture measurement and identification of previous coatings or contaminants. Once these are established, diamond grinding or shot blasting is performed to achieve the right CSP texture for the chosen system. Any cracks, joints, or uneven areas in Staples slabs are repaired before moving to the next phase. During installation in Staples, system components are mixed and applied: a primer coat if needed, followed by the resin base layer, with options for embedded flakes or quartz, finished with a protective topcoat. Equipment like professional-grade mixers, squeegees, and gauge rakes ensure an even finish. The recoat timing is managed carefully to prevent bonding issues between layers. Final site review in Staples checks for uniformity, bond soundness, and finished appearance. USA Epoxy Floors provides Staples with flooring that meets routine and demanding use in garages, warehouses, and occupied residences, defending against abrasion, traffic, and spills.
Each Staples floor receives moisture analysis and tailored mechanical CSP profiling, handled directly by George Tsinias. This targeted prep addresses Staples’s climate and site variables, allowing the epoxy system to adhere and cure as specified and preventing future failures like bubbling or delamination.
USA Epoxy Floors performs all crack filling, joint repair, and failed-coating removal in Staples before any epoxy is installed. Old finishes and surface issues are eliminated so the new resin system bonds only to stable concrete, greatly increasing coating service life for Staples spaces.
USA Epoxy Floors chooses the type of epoxy coating system based on real Staples conditions, such as forklift traffic, automotive use, wet service, or the need for a decorative sheen. Coatings are selected to function and last as dictated by the property and workflow in Staples.
Fill in your information below
USA Epoxy Floors delivers epoxy coating expertise for homes, industry, and businesses in Staples, managed entirely by George Tsinias from consultation to inspection. From assessing conditions and profiling concrete, to correcting flaws and building multi-coat epoxy systems, every stage is handled with deep practical experience. The company is locally rooted, family and veteran owned, with one owner guiding Staples clients through quoting and every on-site stage. The result: a tough, clean epoxy coating tailored to the actual performance demands of Staples environments.
More About Us
Yes. Staples and communities across Fairfield County, Connecticut. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Staples spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Staples, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors applies Staples concrete floor coatings in industrial, residential, and commercial settings. Every job begins with substrate testing and slab preparation, including grinding and defect repair. The completed system forms a tight, resinous surface engineered for Staples operational needs.
View Service
USA Epoxy Floors manages epoxy floor removal in Staples by extracting resin and epoxy coatings through industrial grinding and stripping, leaving the slab fully open and clean for a new surface or contractor follow-up.
View Service
Epoxy floor design in Staples by USA Epoxy Floors combines system specification, color selection, and finish detail planning for performance and appearance. George Tsinias evaluates the substrate and designs a plan that considers Staples traffic and use patterns, producing a resilient and visually matched epoxy floor.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
