USA Epoxy Floors restores worn resin floors in Ruby by inspecting the existing surface, correcting defects, and mechanically abrading before applying a new resin layer. Each recoat is chosen for compatibility, leading to a uniform, reinforced finish that outlasts basic overcoats.
Recoating in Ruby starts with a floor inspection for bond issues, moisture conditions typical in Ulster County, and evidence of prior coating damage or wear. George Tsinias assesses whether surfaces qualify for recoat or need more intensive restoration, checking chemical compatibility throughout. Using diamond grinding or abrasive screening, USA Epoxy Floors brings the profile to what the next system requires, normally CSP-2 or CSP-3 for most recoat installations. Cracks, previous patchwork, and weak sections are remediated, and non-bonding parts are removed to bare concrete when needed. After preparation, industrial vacuums are used to clear dust for a contaminant-free work surface. The new resin layer, selected from epoxy, polyaspartic, or urethane, is installed to match the original system or upgraded as conditions demand. The finished floor undergoes a full visual and adhesion inspection before use, leaving Ruby properties with renewed, robust flooring built for everyday stress.
George Tsinias checks adhesive strength, chemical resilience, and existing wear on every Ruby floor before recommending a recoat. Confirming real compatibility prevents further expense and avoids premature failures. Only qualified floors proceed to recoating, protecting the structure and investment for Ruby clients.
USA Epoxy Floors relies on diamond grinding or screening to establish the CSP needed for new resin attachment in Ruby. Thorough abrasion enables improved adhesion and bond strength, countering failures traced to shortcuts like acid etching or incomplete prep. The right surface ensures a longer-lasting, defect-resistant installation.
Recoating in Ruby is based on the original system and design goals. George selects among epoxy, polyaspartic, and urethane, calibrating for use conditions and finish requirements. This results in floors that look refreshed and stand up to daily work or foot traffic throughout Ulster County.
Fill in your information below
Bringing over 25 years of technical flooring skill to Ruby, USA Epoxy Floors specializes in epoxy floor recoating for commercial, industrial, and residential environments. George Tsinias oversees inspection, preparation, and reinstallation in every Ruby job, ensuring that repairs and compatibility checks are handled properly before new resin goes down. Locally owned, family run, and veteran operated, the company renews resin floors for extended service life and uniform performance in Ulster County and throughout New York.
More About Us
Yes. Ruby and communities across Ulster County, New York. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Ruby spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Ruby, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Floor refinishing by USA Epoxy Floors in Ruby includes mechanical removal of old coatings, grinding, and detailed repairs. The process delivers a sound, clean slab or resinous surface, providing an ideal foundation for a new installation or specialized finish.
View Service
USA Epoxy Floors installs solid color epoxy floors in Ruby by integrating moisture-tested, diamond-ground preparation with layered pigmented resin for consistent color and strength. The finished result is a seamless, stain- and chemical-resistant surface, supporting all property types in Ruby.
View Service
In Ruby, USA Epoxy Floors installs garage epoxy flooring systems designed for vehicles and resistance to chemicals, abrasion, and impact. Moisture evaluation, detailed repairs, and high-performance resin systems ensure enduring results for any Ruby garage.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
