Epoxy floor recoating in Port Ewen brings new life to aged or damaged resin floors by inspecting compatibility, mechanically profiling surfaces, and installing a new matching resin layer. This process renews durability, adhesion, and visual impact in any Port Ewen property.
Recoating projects in Port Ewen start with in-depth testing of the existing floor by George Tsinias, owner of USA Epoxy Floors. He checks for delamination, contaminated spots, and moisture issues found in older Ulster County concrete, testing each layer’s compatibility with a new recoat. Bond tests and spot-removals help map out failures before surface prep. Mechanical profiling in Port Ewen uses commercial grinders and diamond abrasives to reach the CSP the resin system demands. Pitted, spalled, or previously repaired sections are rebuilt using professional-level patch compounds, and loose or aged coatings are fully removed where needed. All dust is extracted before recoating, leaving a clean and bondable surface. Epoxy, polyaspartic, or urethane is then applied as the new system, tailored to match or upgrade the original floor, color, flake, or finish style considered. After topcoating and inspection, Port Ewen clients receive a floor with upgraded appearance, dependable wear, and renewed protection for long-term use.
George Tsinias tests existing floors in Port Ewen for resin type and hidden contaminants like residue, amine blush, or chemical exposure. He confirms if the floor qualifies for recoating, which prevents costly failures from mismatched materials, a critical step often skipped in Ulster County.
Recoating performed by USA Epoxy Floors in Port Ewen relies on industrial diamond grinders and precise abrasive techniques, not hand sanding, to reach CSP levels needed for a durable new bond. This technical approach covers every inch, not just the visible wear spots, for floor longevity.
George Tsinias is personally present in Port Ewen on every recoating project. He walks through diagnostics, prep, and reinstallation, ensuring that repairs and resurfacing are executed completely from start to finish, and delivers floors ready for new service life in Ulster County.
Fill in your information below
With over 25 years in the flooring industry, USA Epoxy Floors delivers professional recoating for epoxy floors in Port Ewen and Ulster County, led directly by owner George Tsinias. Each job features on-site material testing, full diagnostics, industrial surface preparation, and compatible resin application, restoring both function and aesthetics for spaces in the commercial, residential, and industrial sectors. As a locally owned, veteran and family-run operation, USA Epoxy Floors rejects shortcuts, every recoat is a true substrate-to-topcoat restoration, bringing renewed value to properties across New York.
More About Us
Yes. Port Ewen and communities across Ulster County, New York. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Port Ewen spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Port Ewen, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Floor refinishing from USA Epoxy Floors in Port Ewen eliminates worn coatings, fixes slab damage, and produces a strong, well-profiled base. Mechanical grinding and repairs set the surface for any new system or functioning exposed concrete. Each result delivers a substrate ready for next-phase installation.
View Service
Solid color epoxy floor installation by USA Epoxy Floors delivers a single-tone, seamless finish using professional surface prep and multi-coat pigmented resin systems in Port Ewen. The result is a durable, uniform, chemical-resistant surface for residential, commercial, or industrial use in Port Ewen.
View Service
In Port Ewen, USA Epoxy Floors installs garage epoxy flooring systems designed for vehicles and resistance to chemicals, abrasion, and impact. Moisture evaluation, detailed repairs, and high-performance resin systems ensure enduring results for any Port Ewen garage.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
