USA Epoxy Floors installs concrete coatings in New Milford for residential, commercial, and industrial needs. Each project begins with moisture testing and mechanical profiling for bond and longevity. The finished surface withstands chemicals, wear, and day-to-day traffic.
Before application in New Milford, floors are evaluated for previous coatings, contaminants, and moisture emissions. George Tsinias, owner of USA Epoxy Floors, checks for slab strength, unseen repairs, and vapor drive that can affect adhesion. Preparation follows the system: diamond grinding or shot blasting to achieve the surface profile needed for epoxy, polyaspartic, or urethane build. Dust is controlled with industrial vacuums, and cracks or damaged joints in New Milford are repaired with specialty compounds. Primer is applied first, then the build sequence, base coat, broadcasts if specified, and topcoat. Options include decorative flakes, color quartz, or solid-color pigments for different environments in New Milford. The job closes with a walkthrough for finish quality and performance verification. The coated floor protects against chemicals, impacts, and moisture. Finish options and chemistry are chosen for the setting, ensuring a durable floor in New Milford that lasts.
USA Epoxy Floors prepares New Milford floors to the right CSP using diamond grinding or shot blasting. Matching the surface profile to the coating system is critical. This process leads to proper bonding and reduces future peeling or system failure in New Milford.
Moisture is tested with calcium chloride or electronic meters in New Milford. If excess moisture is detected, George selects a mitigation system before coating. This prevents future bubbling, whitening, or loss of adhesion from slab vapor not visible on the surface.
Every New Milford project uses epoxy, polyaspartic, or urethane based on the wear, chemicals, and aesthetics the site needs. USA Epoxy Floors ensures the right resin technology and installation sequence protect the floor against New Milford's daily use conditions.
Fill in your information below
USA Epoxy Floors installs and restores concrete coatings for New Milford homes, businesses, and industrial sites. George Tsinias assesses each slab, manages every step from surface prep to final coat, and stands behind the result. As a locally owned, family and veteran-operated company, they deliver work built for long use, solid color, flake, or designer finishes chosen around New Milford site needs. Every system gets the attention and technical prep necessary for strong adhesion, protection, and finish. Over 25 years of hands-on flooring experience keeps projects on track and finished to the highest criteria in New Milford.
More About Us
Yes. USA Epoxy Floors handles Concrete Coating throughout New Milford and the surrounding Litchfield County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
Mechanical profiling, diamond grinding or shot blasting, so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in New Milford, and is on site during the work.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors applies New Milford concrete floor coatings in industrial, residential, and commercial settings. Every job begins with substrate testing and slab preparation, including grinding and defect repair. The completed system forms a tight, resinous surface engineered for New Milford operational needs.
View Service
In New Milford, USA Epoxy Floors restores level and flat condition to concrete floors by diagnosing, grinding peaks, and applying advanced leveling systems to fill and correct slab imperfections. The resulting finish is ready for coatings, polish, or any flooring installation in Litchfield County.
View Service
Epoxy floor resurfacing from USA Epoxy Floors renews older or damaged coatings through grinding, repairs, and a new resinous system. Preparation targets adhesion, not full removal. The finished floor regains a seamless, clean appearance with restored durability.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
