Floor refinishing from USA Epoxy Floors in New Canaan eliminates worn coatings, fixes slab damage, and produces a strong, well-profiled base. Mechanical grinding and repairs set the surface for any new system or functioning exposed concrete. Each result delivers a substrate ready for next-phase installation.
USA Epoxy Floors delivers floor refinishing in New Canaan, beginning with slab inspection, moisture measurement, and detection of contamination or coating failure. This clarifies the remedy needed, from joint repair to contaminant extraction, especially important in older Fairfield County properties and high-traffic New Canaan sites. Full coating removals are performed by diamond grinders and shot blasters. George applies patch and repair compounds for cracks, pitting, or surface roughness and adjusts the concrete surface profile to the precise CSP classification needed for the final system. Vacuum extraction and edge grinding eliminate dust and perimeter buildup. Each refinished New Canaan floor is then reviewed and tested for surface density, profile, and repair completeness. George finalizes the job by installing the chosen finish or preparing the base for handoff, so new resinous coatings, polishes, or sealers install with no hidden legacy failures.
USA Epoxy Floors refines New Canaan surfaces to the precise Concrete Surface Profile using commercial diamond grinders and perimeter tools. This ensures even bond lines and fully open concrete, supporting chemical or resinous finishes. Proper CSP prep gives the next layer durability that’s impossible without mechanical profiling.
Every refinishing job in New Canaan begins with George diagnosing slab moisture, oil absorption, past repair failures, and hidden contamination. Issues are mapped and remediated, removal, patching, deep cleaning, so new finishes do not inherit the failures of old New Canaan coatings or substrates previously installed in Fairfield County.
George directs and documents every New Canaan floor refinishing personally, managing everything from the initial test to the final pass. Clients deal directly with the project’s technical leader, ensuring each repair, removal, and installation step in New Canaan aligns with best industry practices and that no stage is skipped or hidden.
Fill in your information below
USA Epoxy Floors delivers expert floor refinishing in New Canaan, supporting homes, businesses, and industrial properties throughout Fairfield County with complete substrate renewal. George Tsinias personally evaluates every job, applies technical repairs, performs substrate and CSP grinding, and executes the full refinishing cycle, from failed-coating removal to final prep for installation. Whether it’s a warehouse, a high-traffic commercial property, or a residential garage, floor refinishing in New Canaan solves structural and surface issues before any new material goes down. The approach is owner-handled and direct: every repair, remediation, and prep step is visible and accounted for, ensuring all finished bases are truly ready for the next flooring phase. Local, family, and veteran-owned, USA Epoxy Floors stands behind every refinishing project.
More About Us
Yes. New Canaan and communities across Fairfield County, Connecticut. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated New Canaan spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to New Canaan, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors provides floor finishing in New Canaan, beginning with in-depth substrate cleaning, repairing visible flaws, and applying a high-quality topcoat or sealer. This process renews and protects residential, commercial, and industrial spaces in New Canaan with a consistent, tailored finish.
View Service
USA Epoxy Floors rebuilds deteriorated concrete surfaces in New Canaan with full resurfacing, starting with detailed slab prep including grinding or blasting, followed by comprehensive repair. The renewed surface is left smooth and structurally ready for coatings, stain, polish, or direct use.
View Service
Concrete polishing by USA Epoxy Floors turns plain slabs into dense, polished floors using stepwise diamond grinding. All cracks and surface defects are addressed before the polishing process begins. The finished result is a durable, easy-to-clean floor with the chosen level of sheen for New Canaan spaces.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
