Epoxy floor resurfacing from USA Epoxy Floors renews older or damaged coatings through grinding, repairs, and a new resinous system. Preparation targets adhesion, not full removal. The finished floor regains a seamless, clean appearance with restored durability.
Every epoxy floor resurfacing project in New Canaan starts with a close assessment of the existing coating: George Tsinias, owner of USA Epoxy Floors, checks for delamination, peeling, cracks, and moisture conditions unique to New Canaan construction. Surfaces are moisture-tested, adhesion is screened, and any irreparable damage is identified. Using diamond grinders, all loose or failed coating is removed and the entire floor is mechanically prepared to the right CSP for the new system. Edges, joints, and cracks in New Canaan floors are patched and leveled to provide a stable base. After repair and preparation, a new resinous system is installed. This includes a primer for bonding, base coat, broadcast or pigment if needed, and a protective topcoat suited for the specific use case in New Canaan, garage, shop, commercial, or industrial. Slip-resistant finishes, decorative flakes, or chemical resistance can be integrated. Each layer is applied inside its recoat window, ensuring proper bond and long-term stability. George personally inspects the finished resurfaced floor for coverage, film build, and defect correction. The updated floor in New Canaan delivers renewed looks and performance, restoring what works without the downtime and cost of total floor replacement.
USA Epoxy Floors provides epoxy floor resurfacing across New Canaan for floors that need restoration but do not require complete demolition. George evaluates each slab, mechanically removes loose or failing material, and applies a new coating system for renewed durability, all with minimal disruption.
In New Canaan, resurfacing is the answer for floors with peeling retail kits, delaminated coatings, or wear from heavy use. Every failed layer is stripped by grinding before new materials are installed. The finished floor solves visible failures while correcting what caused them underneath.
Resurfacing in New Canaan uses resinous systems tailored for the environment, industrial-grade for factories, chemical-resistant for shops, or decorative for garages. George guides the specification and finishing process so every resurfaced floor is matched to its real-world use.
Fill in your information below
USA Epoxy Floors is trusted in New Canaan for epoxy floor resurfacing that restores durability without complete floor removal. George Tsinias, the company owner, brings more than 25 years of technical experience to every project across Fairfield County. Floors are evaluated and resurfaced with advanced equipment and correct chemistry, from garages with retail kit failure to busy commercial and industrial settings. As a locally owned, family and veteran-operated business, USA Epoxy Floors resurfaces epoxy floors by addressing substrate problems, ensuring seamless repairs, and delivering new finishes that perform like original installations.
More About Us
Yes. Epoxy Floor Resurfacing is part of the regular service range across New Canaan and Fairfield County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in New Canaan.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors rebuilds deteriorated concrete surfaces in New Canaan with full resurfacing, starting with detailed slab prep including grinding or blasting, followed by comprehensive repair. The renewed surface is left smooth and structurally ready for coatings, stain, polish, or direct use.
View Service
Epoxy floor sealing in New Canaan by USA Epoxy Floors delivers a protective topcoat with thorough surface abrasion and a resin-based sealer. The result is greater chemical resistance and easier cleaning for any coated floor in Fairfield County.
View Service
In New Canaan, USA Epoxy Floors installs flake epoxy floors by broadcasting colored vinyl flakes into a wet epoxy layer over CSP-3-ground concrete, then sealing with a high-build clear topcoat. Each installation uses moisture-checked slabs and fits the needs of businesses and homes in New Canaan.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
