“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
Airplane Hangar Epoxy Flooring in Mountain Dale, NY
USA Epoxy Floors handles flooring installation and restoration for airplane hangars across Mountain Dale, Ulster County, resolving problems such as constant abrasion, fuel leakage, chemical exposure, and concrete deterioration. Our work includes coating removal and concrete repair in maintenance zones and installing epoxy or urethane floor systems for main hangars. Each surface is engineered for the weight of aircraft, exposure to oils and fuels, and heavy-duty service, making hangars in Mountain Dale easier to manage and keep safe.
What We Do With Airplane Hangar Floors
USA Epoxy Floors has provided airplane hangar flooring solutions in Mountain Dale, New York for facility managers, operators, and FBOs, including surface preparation, concrete repair, coating removal, epoxy and urethane system installation, and protective finishes, for over 25 years. Our scope covers main hangar areas, repair bays, storage sections, mechanical spaces, and apron zones that see ongoing equipment movement and heavy loads.
Airplane hangar flooring in Mountain Dale is expected to support aircraft movement, oil and aviation fuel contact, hydraulic fluid leaks, skydrol exposure, and a high rate of abrasion under rolling wheels. These areas need systems that can resist chemical etching, reduce slip hazards, withstand physical impact, and provide seamless transitions between active hangar operations and access corridors.
Our experience with installation, repair, and restoration in Mountain Dale helps us start every hangar project with thorough mechanical preparation and defect correction. This includes removing failed coatings, patching cracks and joints, applying moisture or vapor barriers as needed, and specifying resinous or hybrid systems designed for hangar-specific loads and fluids. We finish with protective or reflective topcoats, slip-resistant aggregates as required, and systems able to stand up under the constant demands of aviation facilities.
Get Started
Fill in your information below
View Flooring Services By The Area On Your Property
Select an area of interest to learn more
About
USA Epoxy Floors
Who We Are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Meet The TeamWhy Ulster County Property Owners Choose Us
- 5 Star Rated
- Licensed & Insured
- 25+ Years In Business
- 100+ Satisfied Clients
About Airplane Hangar Flooring in Mountain Dale, NY
For over 25 years, USA Epoxy Floors has provided airplane hangar flooring services in Mountain Dale, New York, including surface preparation, concrete repair, coating removal, epoxy flooring installation, and protective topcoat application. George Tsinias, owner of USA Epoxy Floors, brings experience with aircraft facility requirements and hangar-grade coatings. The company is locally owned, family-operated, and veteran-owned.
Frequently Asked Questions
Does USA Epoxy Floors work on Airplane Hangar properties near Mountain Dale?
Yes. Airplane Hangar floor work runs throughout Mountain Dale and Ulster County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels across the region for projects of this kind.
Is slip resistance addressed?
It is specified deliberately. Broadcast flake and quartz add texture, and anti-slip additives can go into the topcoat where the operation calls for it. The level is set against how the Airplane Hangar is actually used, including wet areas and wash-down zones.
What happens if the slab has moisture issues?
Moisture vapor rising through concrete lifts coatings that were not built for it, a frequent problem in older Airplane Hangar buildings. Slabs are tested where conditions warrant, and a moisture-mitigating primer or vapor barrier system is specified where readings call for it.
Can installation happen in cold weather?
Often. Polyaspartic and polyurea cure across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Airplane Hangar spaces around Mountain Dale. Substrate temperature is checked before the job is scheduled.
How is the space prepared before work starts?
The floor area needs to be clear, equipment, stock, and vehicles moved out of the sections being coated. For a working Airplane Hangar, the sequence is planned so the disruption is contained to one area at a time wherever the layout allows.
Who runs the project?
Owner George Tsinias. He estimates, works the floor, and handles the final walkthrough on every job, running since 2001. Call or text (845) 464-2539 for a Airplane Hangar project in Mountain Dale.
What Our Clients
Say About Us..
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Get Started
Fill in your information below
Other Property Types We Work On
Select a property type to learn more
Commercial Properties
USA Epoxy Floors delivers flooring solutions for commercial properties throughout Mountain Dale, Ulster County, solving surface wear, coating breakdowns, and safety concerns. Each project, from prepping and fixing floors in entrances and offices to installing new epoxy coatings in restrooms and utility rooms, focuses on long-term durability and appearance. Every system is chosen and built for business traffic and use, helping commercial spaces remain clean, professional, and safe.
Schools
USA Epoxy Floors installs, repairs, and maintains school flooring throughout Mountain Dale, Ulster County, addressing issues like surface wear, cracks, stains, and maintenance challenges. Our services cover hallways, classrooms, cafeterias, and restrooms, providing polished concrete, epoxy coatings, moisture mitigation, and recoating as needed. Each floor system is chosen for the daily demands of school facilities, keeping school environments safe, durable, and easy to maintain.
Distribution Centers
USA Epoxy Floors manages installation, restoration, and repair of distribution center floors throughout Mountain Dale, Ulster County, tackling issues like concrete dust, peeling coatings, advancing cracks, and ongoing abrasion from equipment and pallets. Service areas range from detailed surface preparation in staging bays to installing robust resinous and polished flooring in high-use aisles, storage areas, and loading docks. Each floor system is engineered for heavy load strength, durability, and safe movement, supporting daily distribution center operations.
Factories
USA Epoxy Floors installs and services flooring for factories throughout Mountain Dale, Ulster County, addressing common problems such as chemical damage, abrasion, dusting, and equipment-related impact. Each floor system is built to withstand the operational demands of a factory, from cleaning cycles to heavy machinery, supporting workflow and consistent performance. Factory floors by our team maintain safety, longevity, and reliability for production facilities.
Service Areas
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
Find Your City