USA Epoxy Floors rebuilds deteriorated concrete surfaces in Lakes East with full resurfacing, starting with detailed slab prep including grinding or blasting, followed by comprehensive repair. The renewed surface is left smooth and structurally ready for coatings, stain, polish, or direct use.
In Lakes East, every concrete resurfacing project begins with a thorough inspection by George Tsinias, owner of USA Epoxy Floors. He checks for scaling, unseen cracks, moisture issues, and old repairs that may compromise future performance. Site conditions inform the repair approach: cracks get routed and patched with compatible repair compounds, while any unstable areas are rebuilt or reinforced. The existing surface is then ground or shot blasted to create the right CSP profile based on the overlay that will follow. All contaminants and weak spots are removed, making way for a high-bond resurfacing overlay installed to strict tolerances using industrial mixers and rakes. Leveling and thickness checks are part of the process to promote smoothness and even build. After proper cure time, George performs a final check for bond and flatness. Lakes East property owners are delivered a slab that can immediately take an epoxy or polyaspartic coating, be stained or polished, or serve as upgraded bare concrete, free of the defects and risks from the original wear.
In Lakes East, slab inspections address not only cracks but deep-seated moisture, previous repair failures, and bond-breakers. George Tsinias applies crack routing, patching, and spot remediation to ensure only healthy concrete receives overlay, lowering risk of overlay failure.
Surface preparation in Lakes East is tailored to overlay type, diamond grinding or shot blasting to achieve the system’s exact CSP range. Contaminants and residues are mechanically removed so overlays adhere strongly, giving property owners a slab ready for advanced coatings or polishing.
After full resurfacing, Lakes East sites receive a level, solid, and uniform slab. This surface can support any next step, be it a resinous coating, decorative stain, or mechanical polish. Property owners gain immediate flexibility for industrial, commercial, or residential upgrades.
Fill in your information below
Serving Lakes East and Fairfield County, USA Epoxy Floors delivers concrete resurfacing to residential, commercial, and industrial sites. George Tsinias, owner, uses 25+ years of concrete restoration know-how to diagnose, prepare, and rebuild worn slabs. As a family-run, veteran-owned operation, USA Epoxy Floors carries projects from detailed substrate assessment and precision repair through overlay and final inspection. The resurfaced slab is brought to a reliable, finish-ready standard, supporting new coatings, stains, polishes, or direct use, giving Lakes East property owners long-term flexibility and durability in their concrete flooring.
More About Us
Yes. USA Epoxy Floors handles Concrete Resurfacing throughout Lakes East and the surrounding Fairfield County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
Mechanical profiling, diamond grinding or shot blasting, so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Lakes East, and is on site during the work.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors provides Epoxy Floor Repair in Lakes East for blistered coatings, cracked resin, tire marks, joint failures, and spot delamination across residential, commercial, and industrial floors. Each job starts with diagnosis, bond and moisture checks, and mechanical preparation of the affected area. Fairfield County property owners receive a reconstructed section or a written assessment when broader removal is needed.
View Service
In Lakes East, concrete staining by USA Epoxy Floors uses penetrating stains that become part of the slab itself. After mechanical cleaning or grinding, acid or water-based stains deliver natural coloration and custom finish. The result is a durable, richly colored concrete floor unique to each project.
View Service
Urethane floor installation in Lakes East from USA Epoxy Floors involves mechanical profiling, moisture assessment, and sequential application of urethane layers. The result is a robust floor built for aggressive chemicals, high traffic, and extreme heat or cold.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
