“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
Airplane Hangar Epoxy Flooring in Kent, CT
USA Epoxy Floors handles flooring installation and restoration for airplane hangars across Kent, Litchfield County, resolving problems such as constant abrasion, fuel leakage, chemical exposure, and concrete deterioration. Our work includes coating removal and concrete repair in maintenance zones and installing epoxy or urethane floor systems for main hangars. Each surface is engineered for the weight of aircraft, exposure to oils and fuels, and heavy-duty service, making hangars in Kent easier to manage and keep safe.
What We Do With Airplane Hangar Floors
USA Epoxy Floors has provided airplane hangar flooring solutions in Kent, Connecticut for facility managers, operators, and FBOs, including surface preparation, concrete repair, coating removal, epoxy and urethane system installation, and protective finishes, for over 25 years. Our scope covers main hangar areas, repair bays, storage sections, mechanical spaces, and apron zones that see ongoing equipment movement and heavy loads.
Airplane hangar flooring in Kent is expected to support aircraft movement, oil and aviation fuel contact, hydraulic fluid leaks, skydrol exposure, and a high rate of abrasion under rolling wheels. These areas need systems that can resist chemical etching, reduce slip hazards, withstand physical impact, and provide seamless transitions between active hangar operations and access corridors.
Our experience with installation, repair, and restoration in Kent helps us start every hangar project with thorough mechanical preparation and defect correction. This includes removing failed coatings, patching cracks and joints, applying moisture or vapor barriers as needed, and specifying resinous or hybrid systems designed for hangar-specific loads and fluids. We finish with protective or reflective topcoats, slip-resistant aggregates as required, and systems able to stand up under the constant demands of aviation facilities.
Get Started
Fill in your information below
View Flooring Services By The Area On Your Property
Select an area of interest to learn more
About
USA Epoxy Floors
Who We Are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Meet The TeamWhy Litchfield County Property Owners Choose Us
- 5 Star Rated
- Licensed & Insured
- 25+ Years In Business
- 100+ Satisfied Clients
About Airplane Hangar Flooring in Kent, CT
For over 25 years, USA Epoxy Floors has provided airplane hangar flooring services in Kent, Connecticut, including surface preparation, concrete repair, coating removal, epoxy flooring installation, and protective topcoat application. George Tsinias, owner of USA Epoxy Floors, brings experience with aircraft facility requirements and hangar-grade coatings. The company is locally owned, family-operated, and veteran-owned.
Frequently Asked Questions
Is Airplane Hangar floor coating available in Kent?
Yes. Kent and communities throughout Litchfield County, Connecticut. USA Epoxy Floors has been coating floors since 2001 and regularly takes Airplane Hangar projects across the region.
Which system fits a Airplane Hangar?
It follows the conditions. Epoxy builds thicker and bonds deep, polyaspartic cures fast and holds color under UV. Heavier-duty Airplane Hangar floors often run a thicker epoxy base with a chemical-resistant topcoat. Specification comes after the floor is seen and tested.
Will the floor stand up to the traffic in a Airplane Hangar?
That is what the specification is for. Forklift traffic, vehicle loads, foot traffic, and point impact all inform the build. A floor that was properly profiled and correctly specified handles the demands of the space for years with routine cleaning.
What about chemical exposure and cleaning?
Topcoat chemistry is selected against what actually contacts the floor, solvents, oils, food acids, cleaning agents. In Airplane Hangar spaces with regular chemical contact or wash-down cycles, the system is built for it rather than adapted afterward.
Can existing Airplane Hangar floors be redone?
Usually. Failed coatings are removed mechanically, the slab is inspected to determine why the prior system let go, and the cause is addressed before a new build goes on. Coating over a failure without finding the cause repeats it.
How does scheduling work?
Reach out at (845) 464-2539 or through the estimate form. George Tsinias handles the walkthrough and estimate for Airplane Hangar projects in Kent personally, and is on site during installation.
What Our Clients
Say About Us..
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Get Started
Fill in your information below
Other Property Types We Work On
Select a property type to learn more
Salons
USA Epoxy Floors delivers flooring solutions for salons throughout Kent, Litchfield County, addressing challenges like heavy chair traffic, staining, harsh chemical spills, and frequent washing. From substrate preparation and repairs in styling areas and wash stations to seamless epoxy or polished concrete in reception and sales spaces, our work enhances both aesthetics and durability. Each system is chosen for chemical resistance, longevity, and safety, making salons easier to clean and maintain.
Medical Offices
USA Epoxy Floors provides complete flooring systems for medical offices throughout Kent, Litchfield County, addressing sanitation, wear from traffic, and operational downtime. We handle everything from seamless floors in exam rooms to upgrading reception and office areas for a cleaner, safer workspace. Each medical office floor is built to handle daily disinfection, patient flow, and staff movement, upholding hygiene and safety requirements for medical environments.
Auto Shops
USA Epoxy Floors provides installation, repair, and restoration of flooring for auto shops throughout Kent, Litchfield County, addressing challenges such as oil staining, tire tracks, chipped surfaces, and deteriorating coatings. Each floor system is selected and installed to withstand ongoing vehicle loads, chemical spills, and heavy shop activity, keeping Kent auto shops clean, safe, and operating efficiently.
Breweries
USA Epoxy Floors delivers brewery flooring installation and repair services in Kent, Litchfield County, addressing problems like surface deterioration, safety hazards, slip risks, and cleaning challenges. Solutions include resinous floor systems and concrete restoration for brewhouses, taprooms, packaging zones, cooler areas, and storage, helping maintain constant sanitation and reliability. All brewery floors in Kent are selected for durability through high-traffic use, moisture, and chemical exposure, keeping every brewing and guest area functional and safe.
Service Areas
We provide listings of areas we serve. If you don't see your city, contact us to confirm.