Epoxy coating by USA Epoxy Floors uses a resin system applied to prepared concrete to create a seamless, durable layer. Concrete is diamond ground for profile, repairs are made, and a multi-coat system is applied. Hillside properties receive a smooth, resilient surface for ongoing use.
USA Epoxy Floors starts each epoxy coating job in Hillside with a comprehensive slab assessment and moisture testing. The company checks for old coatings, cracks, contamination, or failures before selection of shot blasting, diamond grinding, or both to achieve the CSP profile required for system bonding. Repairs are made to existing cracks or joints, and leveling is performed if the slab calls for it. Installation in Hillside follows the sequence the coating system demands: primer, high-build resin base coat, optional flake or quartz broadcast, then a durable topcoat. Professional equipment, industrial mixers, gauge rakes, spiked rollers, ensures consistent thickness and finish. Each additional layer is applied during its recoat window for strongest intercoat adhesion. Final walkthrough inspects bond, profile, and visual finish. USA Epoxy Floors delivers a seamless, high-performance surface to Hillside projects across residential, commercial, or industrial settings. Resulting floors stand up to daily traffic, spills, and rigorous workspaces.
Proper adhesion starts with the right surface profile and controlled moisture. All Hillside projects get a mechanical profile, using diamond grinders or shot blasters, to the CSP required by the system. George Tsinias tests and diagnoses moisture before installation, which is vital for preventing failures in Hillside.
Old coatings, cracks, and surface defects in Hillside concrete are handled before epoxy is applied. USA Epoxy Floors mechanically removes failing coatings, fixes cracks, and patches joints, ensuring the new resin system bonds to stable, clean substrate and not to hidden flaws.
USA Epoxy Floors recommends and installs multi-layer, flake, metallic, or high-build resinous coatings based on Hillside property use. Chemical exposure, vehicle traffic, wet zones, or decorative goals shape the coating type and system used in each Hillside project.
Fill in your information below
USA Epoxy Floors provides epoxy coating solutions for Hillside, covering homes, businesses, and industrial properties. George Tsinias brings two decades of substrate evaluation and practical installation experience to every Hillside project. From concrete prep and crack repair through careful system specification and multi-coat application, USA Epoxy Floors delivers a professional result matched to the real demands of Hillside properties. Locally owned, family-operated, and veteran-owned, the company ensures expert direction from quote through completion, making epoxy coatings a high-value choice for durability, safety, and appearance.
More About Us
Yes. Hillside and communities across Ulster County, New York. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Hillside spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Hillside, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors provides Hillside concrete floor coating for residential, commercial, and industrial properties. Projects are built on correct surface prep such as diamond grinding or shot blasting. The finished system delivers a durable, seamless floor designed for Hillside environments.
View Service
USA Epoxy Floors strips away epoxy and resin floors in Hillside by combining heavy-duty grinding, shot blasting, and scraping to return each slab to clean, open concrete for follow-up use.
View Service
Epoxy floor design in Hillside by USA Epoxy Floors means planning color, texture, system, and finish with expert process guidance. George Tsinias evaluates each space and develops a floor plan that supports both style and function. The customer receives a fully thought-out, purpose-built epoxy floor.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
