“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
Bar Epoxy Flooring in Hillside, NY
USA Epoxy Floors manages bar flooring projects throughout Hillside, Ulster County, resolving problems like slippery finishes, stains, and worn or delaminated coatings. From full floor replacement and crack repair to the installation of slip-resistant systems, our services help bars in Hillside endure spills, frequent washing, and steady guest traffic. Each flooring system is designed to handle bar operations, keeping spaces safe, cleanable, and visually refined.
What We Do With Bar Floors
For over 25 years, USA Epoxy Floors has provided bar flooring solutions in Hillside, New York for bar owners and operators, including floor installations, surface preparation, crack and joint repairs, coating removal, epoxy and resinous coatings, and polished concrete. We address flooring in the bar area, behind the bar, adjacent dining sections, restrooms, and entryways, all of which face intense use and exposure to guests and staff.
Floors in bars face continuous exposure to spills, ice, dropped bottles, abrasives from outdoor shoes, and repeated cleaning with chemicals and mopping. Safety is essential at service locations where slip resistance must be maintained, and ease of sanitation supports smooth operations. Appearance matters as much as function, with the need for finishes that resist stains, maintain a professional look, and provide seamless transitions between the serving area, lounges, and high-traffic paths.
Our experience with installation, repair, and restoration in Hillside lets us respond to bar-specific issues through mechanical grinding to develop the correct surface profile, expert crack repair, removal of prior coatings, and selection of resinous or polished systems that deliver both aesthetics and durability. This includes slip-resistant quartz or flake floors, seamless waterproof coatings, and robust finishes built to withstand chemical exposure and deep cleaning. Every surface in a bar setting is chosen to meet the operational, health, and visual standards required in high-traffic hospitality properties.
Get Started
Fill in your information below
View Flooring Services By The Area On Your Property
Select an area of interest to learn more
About
USA Epoxy Floors
Who We Are
USA Epoxy Floors a locally owned Epoxy flooring company based in Fishkill, NY serving Dutchess County & the Greater Tri-State area. A Family-operated, veteran-owned business focused on delivering results that last & look good. With 25 years of experience keeping their commitment to excellence they have cemented their reputation in the community to be a trusted epoxy flooring contracting company any property owner can turn to for all flooring needs for property owners.
Meet The TeamWhy Ulster County Property Owners Choose Us
- 5 Star Rated
- Licensed & Insured
- 25+ Years In Business
- 100+ Satisfied Clients
About Bar Flooring in Hillside, NY
USA Epoxy Floors has provided bar flooring services in Hillside, New York, including mechanical surface preparation, concrete repairs, epoxy coatings, polished concrete, and coating removal, for over 25 years. George Tsinias, owner of USA Epoxy Floors, personally manages each bar floor project from evaluation through final walkthrough and is present on every job site. The company is locally owned, family-operated, and veteran-owned.
Frequently Asked Questions
Is Bar floor coating available in Hillside?
Yes. Hillside and communities throughout Ulster County, New York. USA Epoxy Floors has been coating floors since 2001 and regularly takes Bar projects across the region.
Which system fits a Bar?
It follows the conditions. Epoxy builds thicker and bonds deep, polyaspartic cures fast and holds color under UV. Heavier-duty Bar floors often run a thicker epoxy base with a chemical-resistant topcoat. Specification comes after the floor is seen and tested.
Will the floor stand up to the traffic in a Bar?
That is what the specification is for. Forklift traffic, vehicle loads, foot traffic, and point impact all inform the build. A floor that was properly profiled and correctly specified handles the demands of the space for years with routine cleaning.
What about chemical exposure and cleaning?
Topcoat chemistry is selected against what actually contacts the floor, solvents, oils, food acids, cleaning agents. In Bar spaces with regular chemical contact or wash-down cycles, the system is built for it rather than adapted afterward.
Can existing Bar floors be redone?
Usually. Failed coatings are removed mechanically, the slab is inspected to determine why the prior system let go, and the cause is addressed before a new build goes on. Coating over a failure without finding the cause repeats it.
How does scheduling work?
Reach out at (845) 464-2539 or through the estimate form. George Tsinias handles the walkthrough and estimate for Bar projects in Hillside personally, and is on site during installation.
What Our Clients
Say About Us..
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Get Started
Fill in your information below
Other Property Types We Work On
Select a property type to learn more
Factories
USA Epoxy Floors delivers installation and restoration of factory flooring throughout Hillside, Ulster County, correcting persistent issues such as mechanical wear, dusting, chemical spills, and equipment-related damage. Our services address everything from substrate grinding and repairs in production bays to resilient resinous coatings in storage or loading zones, enhancing durability and functional use across factory areas. Each floor is configured to withstand demanding use, routine washing, and the operational stresses inherent to manufacturing, supporting continuous, productive operation.
Industrial Properties
USA Epoxy Floors installs and restores floors for industrial properties in Hillside, Ulster County, addressing common problems like cracking, dusting, heavy wear, and chemical spills. We cover everything from mechanical preparation and repairs in warehouse and loading areas to complete system replacement and upgrades in production or storage zones. Each surface is engineered for industrial demands, promoting efficient workflow and protecting people and assets across the facility.
New Construction Homes
USA Epoxy Floors addresses flooring for new construction homes across Hillside, Ulster County, focusing on issues like base slab condition, excess moisture, and unfinished concrete. Our services extend from moisture control for below-grade spaces to polished, stained, and protective resinous finishes for both garages and main living areas. Every installation is coordinated to the construction timeline, ensuring the floors in new homes are resilient, clean, and ready for move-in from day one.
Salons
USA Epoxy Floors delivers flooring solutions for salons throughout Hillside, Ulster County, addressing challenges like heavy chair traffic, staining, harsh chemical spills, and frequent washing. From substrate preparation and repairs in styling areas and wash stations to seamless epoxy or polished concrete in reception and sales spaces, our work enhances both aesthetics and durability. Each system is chosen for chemical resistance, longevity, and safety, making salons easier to clean and maintain.
Service Areas
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
Find Your City