USA Epoxy Floors installs concrete coatings in Gardiner for residential, commercial, and industrial needs. Each project begins with moisture testing and mechanical profiling for bond and longevity. The finished surface withstands chemicals, wear, and day-to-day traffic.
Before application in Gardiner, floors are evaluated for previous coatings, contaminants, and moisture emissions. George Tsinias, owner of USA Epoxy Floors, checks for slab strength, unseen repairs, and vapor drive that can affect adhesion. Preparation follows the system: diamond grinding or shot blasting to achieve the surface profile needed for epoxy, polyaspartic, or urethane build. Dust is controlled with industrial vacuums, and cracks or damaged joints in Gardiner are repaired with specialty compounds. Primer is applied first, then the build sequence, base coat, broadcasts if specified, and topcoat. Options include decorative flakes, color quartz, or solid-color pigments for different environments in Gardiner. The job closes with a walkthrough for finish quality and performance verification. The coated floor protects against chemicals, impacts, and moisture. Finish options and chemistry are chosen for the setting, ensuring a durable floor in Gardiner that lasts.
USA Epoxy Floors prepares Gardiner floors to the right CSP using diamond grinding or shot blasting. Matching the surface profile to the coating system is critical. This process leads to proper bonding and reduces future peeling or system failure in Gardiner.
Moisture is tested with calcium chloride or electronic meters in Gardiner. If excess moisture is detected, George selects a mitigation system before coating. This prevents future bubbling, whitening, or loss of adhesion from slab vapor not visible on the surface.
Every Gardiner project uses epoxy, polyaspartic, or urethane based on the wear, chemicals, and aesthetics the site needs. USA Epoxy Floors ensures the right resin technology and installation sequence protect the floor against Gardiner's daily use conditions.
Fill in your information below
USA Epoxy Floors installs and restores concrete coatings for Gardiner homes, businesses, and industrial sites. George Tsinias assesses each slab, manages every step from surface prep to final coat, and stands behind the result. As a locally owned, family and veteran-operated company, they deliver work built for long use, solid color, flake, or designer finishes chosen around Gardiner site needs. Every system gets the attention and technical prep necessary for strong adhesion, protection, and finish. Over 25 years of hands-on flooring experience keeps projects on track and finished to the highest criteria in Gardiner.
More About Us
Yes. Concrete Coating is part of the regular service range across Gardiner and Ulster County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in Gardiner.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
USA Epoxy Floors applies Gardiner concrete floor coating in commercial, residential, and industrial settings. Slab evaluation precedes diamond grinding or shot blasting prep for optimal bond. The completed floor is a single, reinforced system built for Gardiner property use.
View Service
USA Epoxy Floors levels concrete floors by grinding high spots and filling low areas using precision tools and leveling compounds. This service delivers a flat, finished slab ready for coatings, tile, carpet, or polished concrete in Gardiner.
View Service
In Gardiner, USA Epoxy Floors resurfaces worn or failing epoxy floors by mechanically removing loose coating, grinding to open the profile, and installing a new resin system. This preserves what’s solid and replaces only what’s needed, making the floor clean and durable again.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
