USA Epoxy Floors installs solid color epoxy floors in East Kingston by integrating moisture-tested, diamond-ground preparation with layered pigmented resin for consistent color and strength. The finished result is a seamless, stain- and chemical-resistant surface, supporting all property types in East Kingston.
Every solid color epoxy install in East Kingston starts with George Tsinias of USA Epoxy Floors checking the concrete for finish defects, vapor drive, or leftover adhesives often found in older Ulster County or multi-use slabs. Diamond grinding generates the CSP-3 profile critical to keeping epoxy bonded, especially considering freeze-thaw or vehicle use in East Kingston garages and shops. A dedicated primer is applied, then multiple coats of solid-color epoxy precisely layered within recoat windows. Where increased slip resistance or heavy vehicle operation is required, a functional topcoat or aggregate is included. Commercial kitchens and auto shops in East Kingston often select these upgrades for longer life and safety. After curing, George and the property owner review finish quality. Any minor color or surface touch-ups are addressed immediately. The result is a hygienic, easy-to-clean, seamless surface that handles East Kingston’s residential, business, and industrial demands without breaking down under chemicals or daily use.
USA Epoxy Floors only installs resin over East Kingston slabs prepared with diamond grinders to a CSP-3 texture, not by shortcut or acid etch. This level of preparation allows the epoxy to bite into the slab, supporting bonding and longevity even in basements, garages, and commercial spaces that see frequent fork truck or tire contact in East Kingston.
Before any resin is mixed in East Kingston, George inspects the slab using moisture meters and surface testing to rule out vapor problems and incompatible coatings. Mechanical removal, vapor barrier, or crack repair is performed as necessary, ensuring no failures from bubbling or release after the system cures.
USA Epoxy Floors leaves East Kingston properties with solid color epoxy that stays visually continuous and impervious to spills or cleaning agents. No tile lines or joint seams mean fewer issues with maintenance. Whether in retail, industrial, or home settings, the installed floors stand up to oil, traffic, and cleaning cycles alike.
Fill in your information below
USA Epoxy Floors delivers solid color epoxy floor installation services to residential, commercial, and industrial clients throughout East Kingston and Ulster County. George Tsinias, owner, inspects every site personally, manages the preparation, and ensures proper resin layering from start to final walkthrough. With more than 25 years of technical flooring knowledge in the trade, every install features CSP-3 diamond profiling and thorough moisture testing for resin systems built to last. Locally owned, family-operated, and veteran-owned, USA Epoxy Floors combines direct accountability with rigorous install methods to create seamless, color-stable flooring across East Kingston.
More About Us
Yes. Solid Color Epoxy Floor Installation is part of the regular service range across East Kingston and Ulster County. USA Epoxy Floors is based in Fishkill, family operated and veteran owned, and travels throughout the area for this work.
A floor that was properly profiled and correctly specified stands up to vehicle traffic, hot tires, impact, and routine chemical contact for years. What shortens service life is almost always inadequate preparation or a system that did not match the conditions. Maintenance is sweeping and periodic wet cleaning.
It gets identified before anything is applied. Moisture vapor moving upward will lift a coating that was not built for it. Where testing shows elevated readings, a moisture-mitigating primer or vapor barrier system is specified rather than a standard build.
The floor area needs to be clear for grinding and application. Vehicles, shelving, and stored items come out ahead of the crew. On larger commercial floors the work can often be sectioned so part of the space stays operational.
Solid color, decorative flake broadcast, quartz, and metallic systems. Flake adds texture underfoot and conceals minor slab imperfections. Industrial floors often run solid color for visibility and cleaning. Samples are reviewed on site during the walkthrough.
George Tsinias estimates it, works it, and closes it out. He has been doing this since 2001 and is on every project from the walkthrough through the final inspection. Call or text (845) 464-2539 to get on the schedule in East Kingston.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Quartz epoxy floor installation by USA Epoxy Floors delivers a high-build, slip-resistant resinous surface in East Kingston. Mechanical surface preparation, full-broadcast quartz application, and chemical-resistant topcoats ensure durability for commercial and industrial settings in Ulster County.
View Service
Epoxy coating by USA Epoxy Floors uses a resin system applied to prepared concrete to create a seamless, durable layer. Concrete is diamond ground for profile, repairs are made, and a multi-coat system is applied. East Kingston properties receive a smooth, resilient surface for ongoing use.
View Service
Epoxy floor resurfacing from USA Epoxy Floors in East Kingston rebuilds failed or worn resin floors by removing unsound material, profiling the surface for new adhesion, and installing a fresh resinous system. The process avoids full replacement. The result is a seamless, high-performance floor that looks and functions like a complete new install.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
