Epoxy floor recoating restores worn resin floors in Compo by mechanically abrading the surface, repairing defects, and applying a system-matched new layer. This process ensures the recoat bonds correctly and brings back the floor’s durability and appearance.
Every epoxy floor recoating in Compo starts with a detailed floor assessment. George Tsinias, owner of USA Epoxy Floors, checks for previous coating adhesion, moisture issues common in Fairfield County, and existing damage or incompatible finishes. Testing and evaluation catch early signs of coating failure and assure the current floor is a candidate for recoating. Diamond grinding or abrasive screening prepares the surface to the CSP required by the recoat system, typically a CSP-2 or CSP-3. Cracks, spalling, or weak spots get repaired using professional-grade compounds, and failed or non-compatible areas are removed to clean concrete. Professional dust extraction leaves a contaminant-free profile for new material. The recoat layer is installed with epoxy, polyaspartic, or urethane, chosen to match or improve the original system. USA Epoxy Floors finishes with a topcoat tuned to the space’s use, then inspects for coverage and adhesion. The final product is a strong, clean, and visually renewed floor, ready for traffic and use in Compo.
USA Epoxy Floors first inspects floors in Compo for issues with adhesion, chemical damage, or hidden moisture. George confirms that the original surface and coatings can support a new layer, so every recoat starts with a solid foundation. This prevents premature failure and protects your investment by ensuring only suitable floors are recoated.
Recoating isn’t just a new layer of paint. USA Epoxy Floors uses diamond grinding or abrasive screening to create the surface profile needed for the new coating to hold in Compo. Proper abrasion makes the recoat physically and chemically bond, avoiding peeling, bubbles, or uneven finish that come from shortcuts in prep.
Whether the original floor in Compo is epoxy, polyaspartic, or urethane, USA Epoxy Floors chooses a matching recoat process and resin. George selects a system that locks in with the old layer and meets the demands of new traffic or use, restoring durability and appearance with a finish that stands up in Fairfield County.
Fill in your information below
USA Epoxy Floors brings over 25 years of experience in epoxy floor recoating to Compo and Fairfield County. George Tsinias leads every recoating job, checking floor condition, prepping surfaces, and installing new resin layers for residential, commercial, and industrial spaces. Locally owned, veteran and family operated since 2001, the company delivers renewed, durable floors that are ready for daily use while maintaining the highest standards of preparation and finish across Connecticut.
More About Us
Yes. Compo and communities across Fairfield County, Connecticut. USA Epoxy Floors has been doing this work since 2001 and travels throughout the region for it, residential and commercial alike.
The space is cleared, the slab is inspected and profiled mechanically, repairs go in, and the coating system is applied in stages. Cure windows between coats are part of the schedule, not delays. At the end the floor is walked through together before the job closes.
Usually. The existing coating comes off mechanically, and the slab underneath is inspected to identify why the previous system failed. Poor preparation and moisture vapor account for most failures. The cause is addressed before a new system goes down.
It depends on the floor. Epoxy builds thicker and bonds deep; polyaspartic cures quickly, tolerates colder installs, and resists UV yellowing. Many jobs use an epoxy base under a polyaspartic topcoat. The specification follows the slab inspection, the moisture readings, and how the space is used.
Frequently. Polyaspartic chemistry cures across a wider temperature range than standard epoxy, which makes cold-weather work viable in many unheated Compo spaces. Substrate temperature is the controlling factor and gets checked before scheduling.
Reach out at (845) 464-2539 or through the estimate form with the square footage and a description of the space. George Tsinias comes to Compo, walks the floor, and quotes on the spot.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Floor refinishing from USA Epoxy Floors in Compo eliminates worn coatings, fixes slab damage, and produces a strong, well-profiled base. Mechanical grinding and repairs set the surface for any new system or functioning exposed concrete. Each result delivers a substrate ready for next-phase installation.
View Service
USA Epoxy Floors installs solid color epoxy floors in Compo by integrating moisture-tested, diamond-ground preparation with layered pigmented resin for consistent color and strength. The finished result is a seamless, stain- and chemical-resistant surface, supporting all property types in Compo.
View Service
USA Epoxy Floors installs garage epoxy flooring systems designed to handle vehicles, tools, and chemical exposure in any Compo garage. The process includes moisture testing, crack and joint repair, and the application of high-performance epoxy and topcoats.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
