Metallic epoxy floor installation by USA Epoxy Floors creates custom, high-gloss floors built with diamond-ground preparation and specialized patterned metallic pigment layers. Customers receive a one-of-a-kind floor, professionally protected with a commercial-grade topcoat.
Every metallic epoxy installation in Cannondale starts with a site evaluation. George Tsinias, owner of USA Epoxy Floors, checks the slab for old coatings, defects, and moisture readings. The concrete is diamond-ground to a CSP-3 profile to enable strong resin bond, then cleaned and mechanically repaired as needed. A pigmented base coat is applied, over which George pours and manipulates metallic epoxy to create depth and swirling visual effects. Squeegee trowels, rollers, and measured solvent applications help generate the organic movement that makes every finished metallic floor in Cannondale unique. Once the metallic layer sets, a polyaspartic or urethane topcoat, optimized for chemical resistance and gloss, protects the finish. The result is a showpiece floor designed for commercial, retail, or residential environments in Cannondale, fully customized and installed under professional industry standards.
Metallic epoxy floors in Cannondale require a CSP-3 mechanical surface profile. USA Epoxy Floors diamond grinds the slab with planetary grinders and dust extraction, removing barriers to adhesion, past coatings or sealers, and contaminants. This preparation ensures that the resin system anchors deeply for long-term performance.
This process is more than pouring resin. George applies and maneuvers metallic pigment epoxy with tools and solvents directly on the floor, building marbled, cellular depth unique to each installation in Cannondale. This skill is what defines authentic metallic epoxy work and sets professional flooring apart from generic metallic kits.
A polyaspartic or urethane topcoat finishes the metallic system. USA Epoxy Floors selects the topcoat for optimal UV stability and wear resistance based on the needs of Cannondale spaces, whether retail, commercial, or residential. This layer maintains the visual clarity and safety of the floor as traffic and exposure increase.
Fill in your information below
USA Epoxy Floors provides metallic epoxy floor installation for residential, retail, and commercial properties throughout Cannondale and Fairfield County. George Tsinias, the owner, handles evaluation, pigment design, and finished topcoat with more than 25 years of hands-on experience. Every slab gets tested and mechanically profiled before installation, and every metallic pattern is customized on site. As a family and veteran-owned business, the company stands behind every floor from the first quote through final inspection.
More About Us
Yes. USA Epoxy Floors handles Metallic Epoxy Floor Installation throughout Cannondale and the surrounding Fairfield County area. The scope is set after the floor is walked and the slab condition is assessed, so the quote reflects the actual job rather than a generic package.
Work starts with inspecting the slab and testing for moisture where conditions call for it. The surface is mechanically prepared by diamond grinding or shot blasting, damage is repaired, and the coating system is applied in sequence with cure time between coats. The floor is walked through with you at completion.
Most residential-scale work is a one to two day install with cure time before the floor takes traffic. Larger floors and slabs needing significant repair run longer. Polyaspartic topcoats shorten the return to service. Timing specific to your floor is covered at the estimate.
Most structurally sound concrete is. Cracks, pitting, spalling, and existing coatings are handled during preparation. Slabs with active moisture movement are tested first and specified accordingly. If a floor is not a good candidate, you will be told that during the walkthrough.
Mechanical profiling, diamond grinding or shot blasting, so the coating keys into the concrete rather than resting on it. This is the step that determines whether a floor holds. Acid etching alone does not produce a reliable profile and is not used in place of it.
Call or text (845) 464-2539, or use the estimate form. Owner George Tsinias handles the walkthrough and estimate personally in Cannondale, and is on site during the work.
“4 other contractors showed up, did their pitch, and then had to "go back to the office to prepare a quote" - 2 of them never responded and the other two estimates seemed high - George on the other hand showed up, gave me my options and provided a written quote right on the spot that was about 15% less than the other quotes and went on to do a superb job on my garage floor. I would recommend him highly!”
“We are so happy to have discovered George Tsinias. He is an old school artisan and gentleman who takes pride in his work, takes every issue seriously, answers every question, and is a meticulous workman. The garage floor he did for us is stunning. He is humble, fun, courteous, friendly, extremely knowledgeable about adjacent trades and competent in several of them. I am delighted to give him the highest recommendation and look forward to referring him to friends and to using him again.”
“When we called George to give us an estimate on our basement , we knew he was the right guy. He did such a good job in a basement. Then we had him do our two garages. He will never leave a job unless the customer is 100% satisfied. He takes pride in his work. He is a GREAT person to deal with and very responsive and very reasonable.”
“I recently had my basement floor done by USA Epoxy Floors in Fishkill, NY, and I couldn’t be happier with the results. George did an outstanding job from start to finish. He was professional, knowledgeable, and took the time to explain the entire process. The quality of the workmanship is exceptional, the floor came out absolutely beautiful and exceeded my expectations. The attention to detail was impressive, and it’s obvious that George takes great pride in his work. On top of that, the price was very reasonable, especially considering the quality of the finished product. If you’re looking for a company that delivers excellent craftsmanship, great customer service, and fair pricing, I highly recommend USA Epoxy Floors. Thanks again, George, for transforming my basement. It looks fantastic!”
“USA epoxy in Fishkill, New York is one of the greatest epoxy companies I've ever had to deal with George the owner and his crew were amazing. Doing my two floor car garage. The job was finished as promised on time very clean and very professional at their work. I'm in the process of giving them the job of my other house that I have in Long Island New York. And their prices are very, very reasonable compared to other companies. I will definitely recommend.”
“George did an awesome job on our garage floor. He is fair, honest, and timely. He also leaves the site clean when complete.”
“Did an amazing job with our garage. Super professional and easy to work with. Highly recommend.”
Fill in your information below
USA Epoxy Floors is committed to satisfaction & excellence for every customer.
Epoxy floor design in Cannondale by USA Epoxy Floors combines system specification, color selection, and finish detail planning for performance and appearance. George Tsinias evaluates the substrate and designs a plan that considers Cannondale traffic and use patterns, producing a resilient and visually matched epoxy floor.
View Service
In Cannondale, USA Epoxy Floors installs flake epoxy floors by broadcasting colored vinyl flakes into a wet epoxy layer over CSP-3-ground concrete, then sealing with a high-build clear topcoat. Each installation uses moisture-checked slabs and fits the needs of businesses and homes in Cannondale.
View Service
Epoxy floor sealing in Cannondale by USA Epoxy Floors delivers a protective topcoat with thorough surface abrasion and a resin-based sealer. The result is greater chemical resistance and easier cleaning for any coated floor in Fairfield County.
View ServiceSelect an area of interest to learn more
We provide listings of areas we serve. If you don't see your city, contact us to confirm.
